Write a review
Evaluations will be activated after verification.
Item successfully added.
Paddle wheel -BGM PRO Alu CNC- Piaggio 125-180 cc LC 2-stroke
Part no.:
BGM4830
Description
BGM PRO water pump impeller for Piaggio Maxi 125/180 LC
The BGM PRO pump impeller is made of high-strength aluminium and is CNC machined from solid material. It replaces 1:1 the plastic impeller installed ex works.
BACKGROUND KNOWLEDGE
Early 125/180cc Piaggio Maxi engines, as used in the Gilera Runner FX/FXR, Piaggio Hexagon EX/LX/LXT and the popular Italjet Dragster 125/180 models, were fitted with a cast aluminium impeller for the water pump. For cost reasons Piaggio changed to a plastic wheel during production.
PLASTIC VS ALUMINIUM
The two-piece plastic wheel can come loose from the brass nut. A defect which happens unnoticed and causes a total failure of the water pump.
The one-piece BGM PRO pump wheel made of high-strength aluminium, on the other hand, is permanently stable and requires no further attention for the entire service life of the motor.
CONCLUSION
A very solid and above all durable solution for the water pump.
NOTE
The water pump wheel has a left-hand thread, therefore it is loosened by turning it clockwise.
€47.95 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 487167 |
| Customers alternatively searched for | |
|---|---|
| Wasserpumpenschaufelrad | Wapu | Wasserpumpenrad | Schaufelrad | Wasserpumpenförderrad | Förderrad | Antriebsrad | Rad | Pumpenrad | Pumpe | Wasserpumpe | Paddle | Wheel | Roue À Aubes | Girante Per Pompa Acqua | Rueda De Paletas De La Bomba De Agua | | |
Recently viewed items