Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Cylinder -PINASCO 102 cc- Vespa V50, PK50

PN0840
Cylinder -PINASCO 102 cc- Vespa V50, PK50
Cylinder -PINASCO 102 cc- Vespa V50, PK50
Cylinder -PINASCO 102 cc- Vespa V50, PK50
Cylinder -PINASCO 102 cc- Vespa V50, PK50
Cylinder -PINASCO 102 cc- Vespa V50, PK50

Description


Pinasco's 102 cc cylinder is cast in aluminum just like the 75 HP cylinder and is coated with an ultra-hard Nicasil layer. Due to the aluminium, this cylinder is thermally very insensitive despite the increased displacement of over 100%. This is due to the up to 70 percent better heat dissipation than a cast cylinder. The Nicasil coating results in a very wear-resistant raceway. The Pinasco is a very nice to drive Tourer, which convinces with a full torque even at low rpm. A wide rpm range together with a 3.00 primary transmission and a 19 carburettor result in a top speed of 90kmh with an output of 5.1kW, as stated by Pinasco. Pinasco recommends an ignition setting of 18 degrees F.S.T., as well as a fuel injection (with original exhaust) of 74.

The scope of delivery of this cylinder includes 4 stud bolts M7 x 47mm and 4 M7 nuts with 11mm wrench size.


AI-translation

 
€229.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
General
performance class: sport
Gudgeon pins
diameter: 12 mm
Spark plugs
thread type: M14x1,25
thread spark plug: short
heat rating NGK: B8HS
Cylinders
displacement: 102 cm³
bore: 55 mm
engine type: 2-stroke
type of cooling: air cooled
material: aluminium
material piston cylinder surface: Ceramic
cylinder head inclusive:
cylinder gasket set inclusive:
number of transfers (incl.boost ports): 6
number of boost ports: 2
shape exhaust port: single port (oval)
exhaust mounting: flange
flange type: 2 studs
exhaust bolt pitch: 52 mm
Crankshafts
stroke: 43 mm
Pistons
number of piston rings: 2
production method piston: cast
Piston rings
piston ring type: common ring
thickness rings: 1,2mm
Circlips
circlip type: Seeger-type
Cylinder heads
cylinder head type: one piece
Customers alternatively searched for
Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro |

Alternative items


Cylinder -POLINI cast iron 102 cc- Vespa V50, PK50
Polini
1010005
Polini
Cylinder -POLINI cast iron 102 cc- Vespa V50, PK50
Available immediately (delivery time 1-3 working days*)
€173.89 *
*incl. VAT plus shipping costs
Cylinder -DR 102 cc 6 Transfer Ports- Vespa V50, PK50
DR
1310004
DR
Cylinder -DR 102 cc 6 Transfer Ports- Vespa V50, PK50
Available immediately (delivery time 1-3 working days*)
€113.00 *
*incl. VAT plus shipping costs
Cylinder -RMS 102 cc Blue Line- Vespa V50, PK50
RMS
7670241
RMS
Cylinder -RMS 102 cc Blue Line- Vespa V50, PK50
The item is ordered and will be in stock soon
€97.95 *
*incl. VAT plus shipping costs

Ersatzteile


Cylinder base gasket -VESPA 50-125cc- Vespa V50, PV125, ET3, PK50, PK80, PK125 - paper
Piaggio
7670829
Piaggio
Cylinder base gasket -VESPA 50-125cc- Vespa V50, PV125, ET3, PK50, PK80, PK125 - paper
Available immediately (delivery time 1-3 working days*)
€1.29 *
*incl. VAT plus shipping costs
Circlip for gudgeon pin -12mm- Seeger ring type
Normfest
9010008
Normfest
Circlip for gudgeon pin -12mm- Seeger ring type
Available immediately (delivery time 1-3 working days*)
€1.29 *
*incl. VAT plus shipping costs
Piston -PINASCO- Vespa 102cc - 55.0mm
Pinasco
PN92020
Pinasco
Piston -PINASCO- Vespa 102cc - 55.0mm
Available immediately (delivery time 1-3 working days*)
€79.94 *
*incl. VAT plus shipping costs
Piston ring -PINASCO- 102/125cc Vespa V50, PK, PV, ET3 - 55.0mm
Pinasco
PN924080
Pinasco
Piston ring -PINASCO- 102/125cc Vespa V50, PK, PV, ET3 - 55.0mm
Available immediately (delivery time 1-3 working days*)
€35.95 *
*incl. VAT plus shipping costs
Recently viewed items