Write a review
Evaluations will be activated after verification.
Item successfully added.
Primary drive for clutch type Kingwelle/Crimaz CMX -BENELLI reinforced/straight- Vespa Largeframe PX, Rally, Sprint, Cosa, T5, LML 2T - 24/64 (2,66)
Part no.:
BE306424
Description
Gearbox parts from Stefano Benelli rightly enjoy a very good reputation in the racing scene. Anyone looking for reliable racing technology for their gearbox will find it here.
Hardened to an average 60 HRC, Benelli parts offer just the perfect balance of sufficient hardness and necessary elasticity to withstand the enormous stresses in a race engine over the long term. Benelli offers a reinforced primary kit for the Vespa large frame engines with wide primary wheel (from about 1965).
This offers some special features:
Bolted cover plate =no riveting necessary!
- very large selection of reduction ratios = ultra short (3,25) to ultra long (2,40)
clutch pinion for clutch type PX old (6/7springs) = therefore suitable for clutches from Kingwelle or Crimaz CMX
Included are the original primary springs of the PX200 models.
For powerful engines we recommend reinforced primary springs that meet the high torque of a revised engine. These go, unlike original springs, no longer on block. This means that the springs are not completely compressed but still have sufficient spring travel. Thus, load peaks are no longer introduced into the transmission and the components are protected despite higher engine power. The primary kit is delivered ready for installation and has a screwed reinforced cover for the primary springs.
The other side is closed, i.e. this was manufactured with the pinion from the solid.
ASSEMBLY NOTE
If the set is used in a Malossi engine case (VR-One / V-One) this must be slightly exposed at the bearing seat of the large crankshaft bearing.
Otherwise the primary will touch the reinforced bearing seat of the Malossi engine cases.
Primary gear 65Z | ||||
Primary pinion | 20 | 21 | 22 | |
Reduction ratio | 3.25 | 3.09 | 2.95 | |
Primary gear 64Z | ||||
Primary pinion | 22 | 23 | 24 | |
Reduction ratio | 2.90 | 2.78 | 2.66 | |
Primary gear 63Z | ||||
Primary pinion | 23 | 24 | 25 | |
Reduction ratio | 2.73 | 2.62 | 2.52 | |
Primary gear 61Z | ||||
Primary pinion | 22 | 23 | 24 | |
Reduction ratio | 2.77 | 2.65 | 2.54 | |
Primary gear 60Z | ||||
Primary pinion | 23 | 24 | 25 | |
Reduction ratio | 2.60 | 2.50 | 2.40 | |
(US)
€262.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Primär | Antriebsrad | Antriebsritzel | Getriebezahnrad | Vorgelegezahnrad | Vorgelegerad | Primärzahnrad | Primäres | Rad | Übersetzung | Primäre | Untersetzung | Getriebe | Topspeed | Endgeschwindigkeit | Höhere | Primary | Drive | Wheel | Pignon Primaire | Pignone | Piñón Transmisión Primaria | | |
Available versions
Related items
variants
Benelli
BE21717
Gear cluster set incl. 4th gear with 34 teeth -BENELLI type Drag Cluster- Vespa PX125, PX150, PX200, T5 125cc, Cosa, Rally - 12-13-17-17 teeth
BE21717
further versions from €390.00
-
Available immediately (delivery time 1-3 working days*)12-12-17-17 Zähne
-
Available immediately (delivery time 1-3 working days*)12-13-17-17 teeth
RECOMMENDED
Kingwelle
KW0041
Clutch -KINGWELLE DragBikeClutch aluminium version- Vespa PX, T5, Rally, Cosa
KW0041
The item is ordered and will be in stock soon
€577.99
*
*incl. VAT plus shipping costs
RECOMMENDED
Kingwelle
KW0040
Clutch -KINGWELLE DragBikeClutch steel version- Vespa PX, T5, Rally, Cosa
KW0040
The item is ordered and will be in stock soon
€577.99
*
*incl. VAT plus shipping costs
Recently viewed items