Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Rear brake cam -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super

BGM9010
€14.90 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
brake cam rear BGM Original suitable for all Vespa largeframe engines. Perfect OEM quality as a...Continue reading

Description


brake cam rear BGM Original suitable for all Vespa largeframe engines. Perfect OEM quality as a high quality but cheap alternative to the original Piaggio part. CNC manufactured from high strength steel with black oxide surface. Including pre-assembled O-rings.

ASSEMBLY TIP>/strong>: The shoulder in the middle of the shaft (between the O-rings) is already intended as a grease reservoir ex works. Since the shaft is mounted directly in the aluminium of the motor housing, it should always be installed with a grease pack, e.g. with the lithium saponified grease we offer (7673778). This prevents water from penetrating between the shaft and the hole in the housing and effectively prevents contact corrosion.

TIPP>/strong>: Many older motors still use a short brake arm (length approx. 50mm). This can be exchanged for the longer brake arm (65mm) of the later PX Lusso or 200cc models. Due to the longer lever the possible brake power increases considerably, the dosage decreases a little bit.

 

Fits the following vehicles


Recently viewed items