Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Tank sealing kit -FERTAN TAPOX / TX-10 - 285ml+160ml

Tank sealing kit -FERTAN TAPOX / TX-10 - 285ml+160ml
€35.95 *
Unit: 0.445 l (€80.79 * / 1 l)

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
Safety and hazard warnings
hazard pictograms: GHS02, GHS05, GHS07
directive: Complies with directive (EC) No. 1272/2008 and its adaptations.
signal word: DANGER
product identifier: EC 201-245-8: Bisphenol A, EC 202-859-9: Benzylalcohol, EC 203-905-0: 2-Butoxyethanol, EC 215-535-7: XYLENE, EC 216-032-5: m-Phenylenebis(methylamine), EC 217-168-8: 4,4'-Methylenebis(cyclohexylamine), EC 500-033-5: reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular w
Hazard warnings - physical danger: H226: Flammable liquid and vapour
Hazard warnings - health hazard: H312: Harmful in contact with skin, H315: Causes skin irritation, H317: May cause an allergic skin reaction, H318: Causes serious eye damage., H319: Causes serious eye irritation, H332: Harmful if inhaled
Hazard warnings - environmental hazard: H412: Harmful to aquatic life with long lasting effects
Safety instructions - prevention: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., P261: Avoid breathing dust/fume/gas/mist/vapours/spray., P273: Avoid release to the environment., P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
Safety instructions - reaction: P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lens, P310: Immediately call a POISON CENTER/doctor/…, P312: Call a POISON CENTRE/doctor/… if you feel unwell., P333 + P313: If skin irritation or rash occurs: Get medical advice/attention., P370 + P378: In case of fire: Use ... to extinguish.
P For this item you get fidelity point/s
After curing (72 hours at approx. 20° C + relative humidity below 70%) the product is resistant...Continue reading


After curing (72 hours at approx. 20° C + relative humidity below 70%) the product is resistant to all fuels, alkalis and many acids. It forms an extremely resistant layer, which is also resistant to mechanical influences. TAPOX is used for interior coating of tanks such as: Steel and aluminium fuel tanks, oil and heating oil tanks, ballast tanks of ships, water tanks, etc. TAPOX can also be used for coating heavily loaded metals etc. The delivery is always made with the required amount of hardener TX 10 as a set (285ml resin + 160ml hardener)

Recently viewed items