Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm

TM288006
Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm
Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm
Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm
Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm
Carburator -MIKUNI 28mm TM28- manual choke - CS=33mm

Description


Carburettor -MIKUNI 28mm TM- manual choke.

Carburettor equipment: side jet 15, main jet 180, needle 5DP39, slide 2,5.
The connection width is 34 mm. Connection width air filter: 50 mm.



The carburettors from the Japanese manufacturer Mikuni belong to the reference class when it comes to perfect tunability and thus the highest achievable performance with optimum consumption.

The very high quality tuning carburettors from Mikuni offer a considerable increase in throughput and thus a huge performance plus.

The Mikuni carburettors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for the tuning, because Mikuni carburettors do not run with any carburettor equipment, but only with the really suitable one. But in return they run perfectly and you don't expose the engine to the risk that it only runs cleverly in some partial load ranges and then blows up in one of the other partial load ranges.
AI-translation

 
€190.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Carburettors
size venturi: 28 mm
size main jet: 180
main jet type: Mikuni (4/042)
size pilot jet: 15
idle jet type: Mikuni (VM22/210)
size needle: 5DP39
needle type: Mikuni
size atomiser: P-8 (Serie 175)
power jet:
size slide: 2,5
slide type: flat slide
choke type: manual lever
mounting type air filter: rigid
connection size air filter: 33 mm
mounting type intake manifold: rubber mounted
connection size intake manifold: 44 mm
idle gas screw: left hand side
fuel/air mixture screw position: right hand side
fuel hose position: left hand side
depth: 82 mm
connection height (relative): 58 mm
material float chamber: metal
connector for oil hose:
vacuum connection:
Customers alternatively searched for
Vergaser | Gaser | Gasmann | Zerstäuber
Carburettor -MIKUNI 28mm TM- manual choke. Carburettor equipment: side jet 15, main jet 180,...Continue reading

Ratings


16 Jan 2018

Top Vergaser der leicht abzustimmen ist

Ersatzteile


O-ring 19.5x2.4mm -MIKUNI- main jet screw TM 28
Mikuni
TM0105
Mikuni
O-ring 19.5x2.4mm -MIKUNI- main jet screw TM 28
Available immediately (delivery time 1-3 working days*)
€5.15 *
*incl. VAT plus shipping costs
Recently viewed items