Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Voltage regulator -4-plug BGM PRO 12V AC/DC- universal

BGM6690
€27.91 *

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
P For this item you get fidelity point/s
Handy voltage regulator for all electronic 12 V ignitions. The regulator delivery AC as well as...Continue reading

Description


Handy voltage regulator for all electronic 12 V ignitions.
The regulator delivery AC as well as DC current. Therefore it is the perfect replacement for all Ducati 3-pin and 5-pin regulators as well as for the Vespatronic and Variotronic regulators.
  • AC - AC alternating current: IN and OUT for the current delivery of the stator plate and out for the regulated AC current for the wiring loom.
  • SENSE: With this regulator the AC IN and OUT has to be bridged. With the so-called SENSE function the power out is checked by the internals of the regulator with a reference value. So the power output is constant even with alternating load.
  • DC direct current: OUT with DC for charging the battery. With ignition systems capable of high power output consumers can be fed directly. E. g. Satnav systems, water pumps, rev counters, speedos and all sort of other toys.
  • Earth: Simple can be taken from the old existing regulator. If there wasn’t an Earth connection, you should install one. Use the Earth out of the regulator and connect it to the frame of the scooter. Make sure this is fitted to a leading piece of the frame, no paint. Ideally you can wire the earth to the body of the regulator additionally.

The connection of the regulator to your existing wiring loom is easy.
With complete AC systems you simply have to plug the AC out to the wires that lead the current to the consumers.
With systems using AC and DC to run the electrics, you simply have to separate AC and DC lead wires and connect it regarding if there is AC or DC needed.
A few wiring samples are given at the right under documents.
For any further questions send an email to info@scooter-center.com.
 

Fits the following vehicles


Ratings


11 Jan 2018

Der DC Ausgang sollte noch verbessert werden damit man kein Halbwellenspanning raus bekommt

10 Jan 2018

Gute Qualität und sehr gute Beschreibung. Einziger Wunsch, Anleitung in deutsch

29 Jul 2017

sehr gut

26 Jul 2017

sehr gute qualität

10 Nov 2016

Reservekauf für Touren.
Keine Probleme mit dem 1ten auf tausenden Kilometern.
sehr kompakt ! Doku ist dabei.

14 Oct 2016

Schnelle Lieferung. Artikel wie Beschrieben, TipTop. Gerne wieder.

2 Jan 2016

Wie beschrieben, funktioniert super!

5 Dec 2015

Klasse Teil und der perfekte Ersatz für den Spannungsregler der Vespatronik!

4 Nov 2015

Klein und gut wie das Original. Beigefügter Anschlussplan ist super.

19 Oct 2015

Günstige Alternative zu org. Regler

13 Oct 2015

alles ok

26 Aug 2015

es wird in einen 12v 80ccm Yamaha FS1 eingebaut.

26 Aug 2015

Great, thanks.

25 Aug 2015

Bereits verbaut, Top Qualität, 4 Anschlüsse,gehört als Ersatz in jedes Handschuhfach

19 Jun 2015

Freundlich,kompetent und sehr schnelle Lieferung,vielen Dank!

13 Jun 2015

Qualität ist sehr gut. Verwende den Spannungsregler für einen Oltimer und Funktion bis jetzt sehr gut.

18 May 2015

einfach zum anschliessen

18 Mar 2015

prodotto buono sicuramente lo consiglio

16 Mar 2015

Top

26 Feb 2015

Top Produkt! Kann ich nur jeden Weiterempfehlen!

23 Feb 2015

Buono. lo consiglio

8 Nov 2014

Klein und fein passt in jede kleine Ecke !

Recently viewed items