Carburettor -YSN PHBL 25 BS- CS=30mm - without vacuum/oil connection - flip-up choke | Carburettors | Carburettor | Engines

Preview: Carburettor -YSN PHBL 25 BS- CS=30mm - without vacuum/oil connection - flip-up choke

Description

The YSN PHBL 25 carburettor is almost identical to the original in every detail. With the manufacturer YSN we have a very good and reliable manufacturer at our side, who continues to produce the legendary carburettors for us. The quality is absolutely comparable with the Italian original and the parts are also 99% interchangeable. Only the gas slides are guided by a slightly longer centering pin in the carburetor. If Dell'Orto gas sliders are to be used, this pin in the aluminium casting can be simply taken back a little bit.

A big advantage of the PHB carburettors is their simple and good tunability as well as their insensitivity to weather changes. The PHBL shows quite fast and clearly if the mixture is too rich or too lean. A Mikuni or Keihin carburettor usually runs surprisingly well, even if tuned too lean, which unfortunately can quickly lead to a problem.

mixing tube: AQ264
needle: D26
nozzle: 60-65
main nozzle: 95-105
slide valve: 40 (lean)

If problems with the fuel supply are suspected, it is advisable to convert to a larger float needle valve.

BS carburettor = adjusting screws in suction direction left

_{AI-translation}

This item is currently not available.

€84.89 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

Estimated delivery date: 22/05/2024

P For this item you get fidelity point/s

Carburettors
size venturi:	25 mm
size main jet:	102
main jet type:	Dellorto 6mm (6413)
size pilot jet:	70
idle jet type:	Dellorto 5mm (1486)
size choke jet:	60
choke jet type:	Dellorto (7746)
size needle:	D22
needle type:	Dellorto D (2265)
size atomiser:	AQ266
power jet:
size slide:	40
slide type:	round shape slide
choke type:	manual lever
mounting type air filter:	rigid
connection size air filter:	38 mm
mounting type intake manifold:	rubber mounted
connection size intake manifold:	30 mm
idle gas screw:	left hand side
fuel/air mixture screw position:	left hand side
fuel hose position:	right hand side
connection size fuel hose:	7.7 mm
height:	125 mm
width:	85 mm
depth:	90 mm
connection height (relative):	70 mm
fitting type:	M6 x 0.75
material float chamber:	plastic
connector for oil hose:
vacuum connection:
OEM numbers (for comparison purposes only)
Dellorto	02731

Please inform me once the product is available again.

Customers alternatively searched for
Vergaser \| Vergaßer \| Gaser \| Zerstäuber \| Carburator \| Carburettor \| Carburetor \| Carb \| Carburateur \| Carburatore \| Carburador \| Vergaserkit \| Vergaserset \| Vergaser \| Set \| Vergaser \| Kit