Evaluar
Las evaluaciones serán publicadas tras una comprobación.

Los campos marcados con * son obligatorios.
Al hacer clic en "Enviar" o "Guardar" consiento que mis datos personales sean tratados conforme a los términos y condiciones de la política de privacidad de SCOOTER CENTER GmbH.

 
 
El artículo se ha añadido correctamente.

Lambretta (Innocenti) LI 150 (serie 2)

Lambretta (Innocenti) LI 150 (serie 2)

Descripción


Lambretta Li 150
Series 2

In October 1959 the Lambretta LI Series II was introduced. The advertising concentrated on the proverbial “Lambrettability” and the next great success for Innocenti was almost certain from the start. In fact the Series II with 270.000 scooters made, was the best selling Lambretta model so far. At the engine only a few details were changed, e.g. a slightly longer Cylinder with matching piston was used. All models now have the air intake under the rider's seat, which had already been introduced with the latest Series I models. The biggest difference however is the headlight, which had been moved to the headset. The LI 125 only has a front saddle as standard, whicle the LI 150 also features a rear saddle for the pillion. The additional rear saddle for the 125 was available as an option as well as the dual seat. Also the design of the floorboard shows the differences between the capacity- classes: while the LI 125 only had alloy struts, the 150 received alloy ribs with grey rubber strips and end caps. The rear lense was changed and increased in size during the production run. The rear lense gasket was still white and also most of the rubber parts stayed grey with the exception of the kickstart rubber and stand feet.

In January of the same year the TV 175 Series II had reached the shops, introduced as “the sportsman's scooter”. The main visual difference is again the new headset which incorporates the headlight. The TV 175 had the same alloy ribs with rubber inserts on the floorboard as the LI 150 and sported a dual seat as standard, while single seats were available as an option. The front forks with additional dampers were retained from the Series I, while the front brake drum and the forklinks were redesigned. The rear lease and the horncasting were changed during the production in the same way as the LI's, and also the rubber parts had the same colour scheme.

Model:
Capacity:
Production period:
Quantity:
Production code:
1st frame no.:
Li 150
150 cc
10/59-11/61
162.040
150LI
800.001

 

Li series 2 – 1st version
(June 1959 until mid 1960)

Small tail light (142 x 43 mm), round horn grille, air filter held by a nut, splashplate is held by eight 5mm bolts.

 

Li series 2 – 2nd version
(mid 1960 until January 1961)

Large tail light (130 x 58 mm), oval horn grille, air filter held by a nut, from October 1960 the splashplate is held by two 8mm bolts.


Li series 2 – 3rd version
(February 1961 until November 1961)

Air filter is held by a clip (as Series 3)

 

Original paint (Lechler)

Grigio Fiume
8014 (*1)
Farbkarte
Grigio Chiaro
8019 (*2)
Farbkarte
Azzurro Flaminia
8032 (*3)
Farbkarte
Bleu Inghilterra
8031 (*3)
Farbkarte
Verde Nilo
8015 (*3)
Farbkarte
Rosso Rubino
8047 (*3)
Farbkarte
Rosso Corallo
8046 (*3)
Farbkarte

(*1) = single tone scheme
(*2) = two tone scheme, frame colour
(*3) = two tone scheme, side panel colour

 

 
Vehículo (general)
Modelo: LI 150 (serie 2)
Año/s de producción: 1959, 1960, 1961
N.° de chasis: 150LI
Unidades fabricadas: 162040
Colores: azzurro flaminia (8032), bleu inghilterra (8031), grigio albo (8019), rosso corallo (8046), rosso rubino (8047), verde nilo (8015)
Vehículo dimensiones
Longitud: 1825 mm
Anchura: 710 mm
Altura: 1060 mm
Altura del asiento: 785 mm
Altura al estribo: 165 mm
Distancia entre ejes: 1290 mm
Capacidad depósito combustible: 8.5 l
Reserva incl. (combustible): 0.75 l
Peso (en vacío): 105 kg
Peso (en funcionamiento): 120 kg
Peso (máx.): 258 kg
Vehículo ruedas
Rueda delantera: 3.50 - 10
Rueda trasera: 3.50 - 10
Llanta delantera: 2.15 - 10
Llanta trasera: 2.15 - 10
Vehículo frenos
Tipo de freno delantero: freno de tambor
Accionamiento del freno delantero: mecánico con cables
Ø delantero: 150 mm
Tipo de freno trasero: freno de tambor
Accionamiento del freno trasero: mecánico con cables
Ø trasero: 150 mm
Vehículo suspensión
Tipo de suspensión delantera: horquilla adelantada, solo muelle
Tipo de suspensión trasera: conjunto muelle-amortiguador
Vehículo motor
Cilindrada: 148 cm³
Carrera: 58 mm
Diámetro: 57 mm
Tipo de motor: 2 tiempos
Número de cilindros: 1
Tipo de refrigeración: por aire
Potencia (kW): 4.91 kW
Potencia (cv): 6.67
Revolución por minuto (potencia máx.): 5200
Compresión: 1:7
Alimentación: carburador
Carburador: Dell'Orto MA19 BS5
Arranque: pedal
Embrague: manual
Fabricante del motor: Innocenti
Velocidad máx.: 83.1 km/h
Tipo de motor: 2 tiempos
Norma de emisión: sin
Vehículo motor - encendido
Tipo de encendido: con platinos
Avance de encendido: 23
Distancia entre contactos: 0.45 mm
Potencia (luz): 30 W
Tensión: 6 V
Bujía: (NGK) B7ES
Vehículo motor - caja de cambios
Caja de cambios: manual
Número de velocidades: 4
Relación de transmisión primaria - 1:: 3.0666
Relación de transmisión 1.a velocidad - 1:: 4.545
Relación de transmisión 2.a velocidad - 1:: 2.928
Relación de transmisión 3.a velocidad - 1:: 2.176
Relación de transmisión 4.a velocidad - 1:: 1.7
Relación de transmisión total - 1:: 5.2133
Vehículo líquidos
Carburante: Super (ROZ 95)
Mezcla: 1:50
Lubricante engranaje: SAE80
Cantidad lubricante engranaje: 0.7 l
Los clientes buscaron alternativamente
Lambretta Li 150 Series 2 In October 1959 the Lambretta LI Series II was introduced....Seguir leyendo
Productos vistos últimamente