Scrivi una recensione
Le valutazioni verranno attivate dopo la verifica.
L'articolo è stato aggiunto correttamente.
Lambretta (Innocenti) E 125
Descrizione
Lambretta E & F 125
With its very low sales price, the Model E was meant to offer a cheap step into the world of Lambretta scooters. To keep the cost down, the design was much simplified compared to the model C or D.
The frame is shaped like a C. The tank is mounted underneath the rider's saddle while a toolbox is fitted under the pillion seat. Due to the simple construction of the frame, the model E is quite light, with many parts simply welded directly to the frame rather than bolted on, like the rear-light and the license-plate holder. The legshields are shortened and resemble the shape of the model D.
The completely new engine had a crank that was fitted longitudinally to reduce the complexity of the transmission. To start the engine, neither kickstart nor electric starter were fitted. Instead, the E was started via a pull-string similar to that of a lawn-mower. To ease the starting procedure, the ignition timing could be altered manually to stop the engine from backfiring.
The rear suspension was via torsion bar as used in the model D. The front forks however received a leading link suspension with several c-shaped springs and rubber buffers. As the starting mechanism caused frequent problems, the E was soon superseded by the model F, which featured a more conventional kickstart. This was also available as an accessory for the model E, which needed the floorboards cut to fit one reason why unmodified model Es are rather rare nowadays. Power output of the 125cc engine is similar to that of the model D, so that the lightweight E had very good performance and consumption figures to balance the problems with the starting system. Still the budget models were rather unsuccessful and production ceased after
43.352 model E and 32.701 model F respectively.
125 E
(first batch)
Teleflex cable fitted to the engine by a single stud. Engine no. engraved into the gearbox-cover.
| Model: Capacity: Production period: Quantity: Production code: 1st frame no.: |
125 E 125 cc 04/53-02/54 42.352 125E 00001 |
125 E – 1st version
(until mid of production-run)
Retardable ignition by a lever at the crankcase. Toolbox-lid with lock but without clips. Legshields and rear mudguard welded to the frame.
125 E – 2nd version
(from mid until end of production-run)
Flywheel with automatically retarding ignition. Toolbox with lock and clips, legshields and rear mudguard bolted to the frame, front mudguard with additional brackets. The last models made had the exhaust on the righthand-side of the scooter.
Original paint (Lechler)
| Verde Oliva 8021 |
 |
| Veicolo (generale) | |
|---|---|
| denominazione: | E 125 |
| anno di costruzione: | 1953, 1954, 1955, 1956 |
| numero telaio: | 125E |
| numero esemplari prodotti: | 42352 |
| colori: | verde oliva (8021) |
| Veicolo dimensioni | |
| lunghezza: | 1760 mm |
| larghezza: | 710 mm |
| altezza: | 950 mm |
| altezza seduta: | 760 mm |
| altezza dal suolo: | 130 mm |
| interasse: | 1280 mm |
| capacità serbatoio benzina: | 6 l |
| di cui riserva (benzina): | 0.7 l |
| peso (a vuoto): | 62 kg |
| Veicolo ruote | |
| pneumatico anteriore: | 4.00 - 8 |
| pneumatico posteriore: | 4.00 - 8 |
| cerchio ruota anteriore: | 2.50 - 8 |
| cerchio ruota posteriore: | 2.50 - 8 |
| Veicolo freni | |
| tipo freno anteriore: | freno a tamburo |
| azionamento freno anteriore: | meccanico con cavo |
| Ø anteriore: | 125 mm |
| tipo freno posteriore: | freno a tamburo |
| azionamento freno posteriore: | meccanico con cavo |
| Ø posteriore: | 140 mm |
| Veicolo sospensione | |
| tipo sospensione anteriore: | forcella leading link, solo molla |
| tipo sospensione posteriore: | molla a torsione |
| Veicolo motore | |
| cilindrata: | 123 cm³ |
| corsa: | 58 mm |
| alesaggio: | 52 mm |
| tipo di motore: | 2 tempi |
| numero cilindri: | 1 |
| tipo di raffreddamento: | ad aria |
| potenza (kW): | 2.71 kW |
| potenza (CV): | 3.68 |
| giri/min (P max): | 4000 |
| rapporto di compressione: | 1:6.3 |
| preparazione miscela: | carburatore |
| carburatore: | Dell'Orto MU14 B1 |
| avviamento: | a strappo |
| frizione: | manuale |
| marca motore: | Innocenti |
| velocità massima: | 70 km/h |
| tipo motore: | 2 tempi |
| normativa emissioni: | nessuna |
| Veicolo motore - accensione | |
| tipo di accensione: | accensione a puntine |
| anticipo accensione: | 25 |
| distanza contatti: | 0.55 mm |
| potenza (luce): | 30 W |
| tensione: | 6 V |
| candela: | (NGK) B8HS |
| Veicolo motore - ingranaggi cambio | |
| tipo cambio: | manuale |
| numero marce: | 3 |
| rapportatura 1a marcia - 1:: | 13.4 |
| rapportatura 2a marcia - 1:: | 8 |
| rapportatura 3a marcia - 1:: | 4.93 |
| Fahrzeug Betriebsstoffe | |
| carburante: | Super (ROZ 95) |
| rapporto miscela: | 1:25 |
| olio ingranaggi: | SAE50 |
| quantità olio ingranaggi: | 0.6 l |
| I clienti cercavano in alternativa | |
|---|---|
Articoli visualizzati di recente