Scrivi una recensione
Le valutazioni verranno attivate dopo la verifica.

I campi indicati con l'asterisco * sono obbligatori.
Cliccando su "Salva" autorizzo il trattamento dei dati personali secondo le modalità indicate nell'Informativa sulla privacy di SCOOTER CENTER GmbH.

 
 
L'articolo è stato aggiunto correttamente.

Asse porta ruota anteriore - freno a tamburo incl. Dado -BGM PRO- Lambretta LI, LIS, SX, TV, DL, GP, J , Lui, LD (1957)

BGM7890EKT
Asse porta ruota anteriore - freno a tamburo incl. Dado -BGM PRO- Lambretta LI, LIS, SX, TV, DL, GP, J , Lui, LD (1957)
Asse porta ruota anteriore - freno a tamburo incl. Dado -BGM PRO- Lambretta LI, LIS, SX, TV, DL, GP, J , Lui, LD (1957)
Asse porta ruota anteriore - freno a tamburo incl. Dado -BGM PRO- Lambretta LI, LIS, SX, TV, DL, GP, J , Lui, LD (1957)

Descrizione


Together with MMW we have finally designed the bgm PRO version of a hydraulic disc brake. The look is very subtile for a hydraulic disc brake and mostly determined by the use of a modified original front brake hub.

The braking power however is second to none. The combination of the caliper with its massive four pistons and the large diameter brake disc (220 mm) gives a second to none braking power.

The Antidive system adds this and as the name suggests the diving of the front end on braking is an issue of the past.

All CNC parts are machined from billet in Germany. The total quality of the item leaves nothing to be desired.

The brake unit comes pre-assembled to make you the final assembly easier. It is pre-assembled only, because most of the drum brakes will be painted to be matched to the colour or colour scheme of your Lambretta. The original speedo drive is used with this kit. All needed small parts are included. The oil seals and bearings are of European origin (like FAG or SKF for instance).

The threads of the drum are reinforced.
  • FEATURES:
  • Massive brake disc with 220 mm diameter
  • Four piston caliper (not included)
  • Anti-Dive
  • Original drum brake used, reinforced on studs
  • Made in Germany
  • CNC parts are machined from billet
  • Pre-mounted to make final assembly easier

If you fit Antidive disc brakes to disc brake forklinks these are a straight fit. On all drum link fork links the pivot on the RHS needs to be cutted away. Otherwise the Antidive system will not work.

The Antidive leg should sit at an angle of 90° to the fork.

With some aftermarket rims (especially tubeless ones) there won’t be space between the wheel rim and the caliper. Here you normally can take material off the brake caliper for enough clearance. The tyre size shouldn’t be larger than 3.50-10.
 
29,90 €

IVA incl., più spese di spedizione

Disponibile immediatamente (tempi di consegna 1-3 giorni lavorativi*)
P Per questo articolo ricevi punto/i fedeltà
I clienti cercavano in alternativa
Scheibenbremse | Set | Scheibenbremse | Umrüstkit | Umrüstset | Grimeca | Bremsscheibenumrüstset | Hydraulik | Hydraulisch | Vollhydraulik | Vollhydraulisch | Bremsscheibenumrüstkit | Bremsscheibenkit | Bremsscheibenset | Bremse | Bremsenumrüstung | Bremsenkit | Bremsensetdisc | Brake | Disc Brake Kit | Disc Brake Set | Disk Brake Set | Hydrualic Brake Conversion | Frein À Disque | Freno A Disco | Freno De Disco |
Together with MMW we have finally designed the bgm PRO version of a hydraulic disc brake. The...Continua a leggere
Articoli visualizzati di recente