Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

Item successfully added.

Gasket remover -NORMFEST Seal-Ex- 400ml

Gasket remover -NORMFEST Seal-Ex- 400ml
€12.95 *
Unit: 0.4 l (€32.38 * / 1 l)

incl. VAT plus shipping costs

In stock: can be delivered or picked up in the store
Safety and hazard warnings
hazard pictograms: GHS02, GHS07
sales sestrictions: This article may only be sold to persons over the age of 18.
directive: Complies with directive (EC) No. 1272/2008 and its adaptations.
signal word: DANGER
Hazard warnings - physical danger: H222: Extremely flammable aerosol, H229: Pressurized container: may burst if heated
Hazard warnings - health hazard: H319: Causes serious eye irritation
Safety instructions - general: P101: If medical advice is needed, have product container or label at hand., P102: Keep out of reach of children., P103: Read carefully and follow all instructions.
Safety instructions - prevention: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking., P211: Do not spray on an open flame or other ignition source., P251: Do not pierce or burn, even after use., P260: Do not breathe dust/fume/gas/mist/vapours/spray., P271: Use only outdoors or in a well-ventilated area., P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
Safety instructions - reaction: P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lens
Safety instructions - storage: P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Safety instructions - disposal: P501: Dispose of contents/container to ...
P For this item you get fidelity point/s
Properties: Removes in minutes residues of baked-on Solid gaskets. Motor sealants, cured...Continue reading



Removes in minutes residues of baked-on

Solid gaskets. Motor sealants,

cured adhesive e (superglue,

screw locking compounds

etc.), paints, lacquers, oil residues, greases,

resins etc.

application :

shake can well. Spray onto surface, allow to take effect for

5-10 min., then

>Treat surface with suitable tool



Protect painted surfaces. Before use, check compatibility.

Not suitable for sensitive plastics

e, PVC and synthetics.


No run-off on vertical surfaces.

Multi-purpose application on

Metal, wood, glass, ceramics,

Polyethylene and polypropylene

Content 300 ml



29 Jun 2015

Super Sache für alte Silikondichtungen.
Ging in 10min. ab.
Vorsicht! Schutzbrillen verwenden und Werkbank abdecken, löst auch gleich spielend leicht Lack auf!

Recently viewed items