Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Plug with o-rings for oilpump hole -OEM QUALITY- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy

3331048
Plug with o-rings for oilpump hole -OEM QUALITY- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy
Plug with o-rings for oilpump hole -OEM QUALITY- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy
Plug with o-rings for oilpump hole -OEM QUALITY- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy

Description


Oil pump shaft plug PX

Used to close the hole in the engine case of the PX models for the oil pump shaft. Necessary when removing the original carburetor bowl and using a carburetor with its own intake manifold.

Instruction:

  • Remove carburetor pan (1x M5 slotted screw under the carburetor gasket).
  • Pull out the oil pump shaft upwards
  • Fit plug with O-rings (grease O-rings lightly)
  • Push the plug gently into the hole
  • Screw the enclosed screw into the existing hole
  • Alternatively, the enclosed taper pin can also be driven lightly into the bore (hammer). Then shorten the protrusion (Flex/Dremel).

The plug is made of precision turned aluminium and is used with two high quality NBR O-rings.
Compared to other solutions, the plug is plugged in and fixed in the housing by means of the enclosed self-tapping screw. If necessary, it can therefore be easily removed again.

AI-translation

 
€13.74 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Customers alternatively searched for
Verschlussstopfen | Ölpumpenloch | Verschlussstopfen | Abdeckung | Ölpumpenbohrung | Motorgehäuse | Gehäusebohrung | Stopfen | Propfen | Verschluß | Loch | Gehäuseloch | Getrenntschmierung | Ölpumpe | Zumachen | Verschließen | Dichten | Abdichten | Alustopfen | Dichtstopfen | Plug | Oilpump | Hole | Bouchon Pour Trou De Pompe À Huile | Tappo Per Foro Oilpump | Tapón Para Agujero Oilpump |

Alternative items


Plug for oilpump hole -VSR- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy
VSR
7675797
VSR
Plug for oilpump hole -VSR- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy
Available immediately (delivery time 1-3 working days*)
€6.90 *
*incl. VAT plus shipping costs

Ersatzteile


O-ring 9.0 x1.0mm -NBR70- used for plug for oilpump hole, part no. 3331048
OEM-Qualität
3331098
OEM-Qualität
O-ring 9.0 x1.0mm -NBR70- used for plug for oilpump hole, part no. 3331048
Available immediately (delivery time 1-3 working days*)
€1.90 *
*incl. VAT plus shipping costs
Recently viewed items