Sticker set -POLINI- 2x Polini 340x110mm - blue, suitable for light surfaces

Stickers require a clean, smooth and degreased surface for permanent fixing.
For example, our brake cleaner is very suitable for degreasing.

For larger surfaces to be pasted, it is always advantageous to spray the surface with a little water before pasting. The water can also be mixed with a few drops of washing-up liquid to make it more slippery. This way you can always make corrections during the application without destroying the sticker. If the sticker is on a carrier film, you can use a plastic squeegee to push the water out from under the sticker by pulling the squeegee diagonally and with light pressure over the surface. This prevents water reservoirs from forming in the sticker, which would only dry slowly, and the bond between the sticker and the surface is further improved by the squeegee.

Stickers without a carrier film can also be processed in this way with a document protection cover from the office supplies. Those who have steady hands can of course position the sticker directly without the aid of water.

_{AI-translation}