Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)

BGM5325
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)
Brake shoes -BGM PRO Ø=135x20mm- VESPA V50 (r) closed 4 hole rim (vehicles built 1963-1971) - 9 inch + 10 inch - Vespa 50 N (V5A1T), 50 L (V5A1T), 50 R (V5A1T), 50 S (V5SA1T), 50 Revival (V5R1T)

Description


BGM PRO brake shoes with lining material 'MADE IN GERMANY

QUALITY
BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. The pad material comes from the German manufacturer Beral. The aluminum pad carrier is cast in the original molds, so a perfect fit is always guaranteed.

MATERIAL + PERFORMANCE
The pad compound for the BGM PRO brake pad has a high coefficient of friction averaging over µ=0.54. This is maintained over a wide temperature range. The BGM PRO brake pad withstands temperature peaks of up to 350°C and is therefore suitable for the toughest applications.

DOSAGE + RESPONSE
The braking behavior is powerful from the start, but at the same time easy to calculate and dose. These good properties do not diminish even under high loads. With a pad hardness of over 71 shore on average, the pad is also not too soft and offers clear feedback on the brake lever.

ENVIRONMENT
The BGM brake pad material is manufactured without the use of solvents. It contains no heavy metal compounds and of course no asbestos. BGM PRO brake pads are deliberately not painted for environmental reasons. Manufactured according to ECE R-90.

SUPPLY
The scope of delivery includes:

  • 1 pair of brake pads

  • 2 pcs. Plate (metal clip)

  • 2 pcs. Brake shoe fuses

  • 1 piece of heat-resistant assembly paste from Würth (for lubricating the brake pad bolts and the brake cam/plate)

CONCLUSION: Quality and brake performance on a professional level


We have tried with the help of all available manufacturer information and our years of experience to address the issue of brake components as error-free as possible,
however, this is unfortunately not 100% possible.
Depending on the availability at the time of vehicle production, the vehicle manufacturers can come to different combinations of the installed components.
Therefore, we must ask you in case of doubt before ordering to check the compatibility based on the product photos and the specified dimensions.
Of course, a return of erroneously ordered items is sufficiently stamped and in mint / saleable condition within the statutory deadlines possible.
Thank you for your understanding.

AI-translation

 
€20.80 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
OEM numbers (for comparison purposes only)
Piaggio 267770, 90582, 78362
Customers alternatively searched for
Bremsbeläge | Backen | Beläge | Bremse | Bremsbelag | Bremsbacken | Bremsschuhe | Bremsklötze | Bremsbelege | Brake | Pads | Brake Pads | Friction Pads | Plaquettes De Frein | Garnitures De Frein | Pastiglie Freno | Forros De Freno | Remblokken | Remschoenen | Pastillas De Freno | Mordaza freno |

Alternative items


Brake shoes -POLINI Ø=135x20mm- VESPA V50 (r) - 9 inch
Polini
P1760130
Polini
Brake shoes -POLINI Ø=135x20mm- VESPA V50 (r) - 9 inch
Available immediately (delivery time 1-3 working days*)
€22.05 *
*incl. VAT plus shipping costs
Brake shoes -VESPA Ø=135x20mm- VESPA V50 (r) - 9 inch
Newfren
4350140
Newfren
Brake shoes -VESPA Ø=135x20mm- VESPA V50 (r) - 9 inch
Available immediately (delivery time 1-3 working days*)
€14.65 *
*incl. VAT plus shipping costs
Recently viewed items