Clever tool from BGM for damage-free installation of stud bolts. Screw the BGM Pro tool onto the...Continue reading
Clever tool from BGM for damage-free installation of stud bolts. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. In the process, it is braced with the thread of the stud bolt. Now turn the outer surface of the wrench. The stud bolt is fixed and can be loosened or screwed in. Make sure that the lock is sufficiently tight so that the tool does not come loose.
Ideal for short bolts (e.g. Lambretta gearbox covers). The required minimum length of the thread is:
M6 / /M7 = 6.5mm
M8 = 9mm
Available individually or as a set. Also available for the rare thread size M7!
Required additional tool:
Muzzle/ring spanner: SW19
Hexagon socket wrench: 6mm
NOTE: Please note that studs glued in with screw glue/Loctite often have a very high breakaway torque. Here you should try in advance to heat the stud bolt(s) or the housing around it to loosen the adhesive connection.
By: Scooter Center 2016-07-13 16:05:10
In and out - stud installer -BGM PRO- mounting and dismounting
This is the correct way to mount a stud
Brake drums, cylinders, engine casings - studs are everywhere. Mounting usually includes the locknut method. And we have even seen the use of pliers... But thi...
Recently viewed items
Find out more