Swing arm brace -HEIKOTUNING- Brace V2 - silver - Piaggio 125-180 cc 2-stroke AC/LC | Swing arm brace | Crankcase | Engines

Preview: Swing arm brace -HEIKOTUNING- Brace V2 - silver - Piaggio 125-180 cc 2-stroke AC/LC

Description

The engine cases of the large Gilera Runner models with 125/180cc are notorious for the fact that they like to crack.
What is said here so casually, can represent an incalculable risk in an emergency.
Piaggio has in the construction of the housing, which is based on the earlier and very stable SKR/Hexagon engines, to accommodate the larger tires weakened the housing at a very neuralgic point. As a result, completely destroyed motors occurred and continue to occur, although no obvious fault is apparent.
A purchasable and easily mountable solution to this problem is available from HEIKOTUNING and PM-Tuning.

The -HEIKOTUNING- Brace V2 swingarm is designed for both drum brake and disc brake engines. It is mounted on the exhaust mounting of the engine block and on the central bolting of the rear wheel, thus blocking the entire engine into a stable unit.
Torsional stresses during hard acceleration as well as lateral loads are minimized and the risk of case breakage is greatly reduced. The swingarm is made of high-strength anodized aluminum.
Mounting of the PM59 X is possible with the HT03602 adapter.

Available in five different colors.

_{AI-translation}