cylinder kit -NARAKU- 70cc for 1E40QMB (E2)

High-torque and suitable for everyday use 70cc cylinder kit from NARAKU with 12mm piston pin. This cylinder kit is not designed for revs, its strengths lie in the lower rpm range. Already shortly above idle speed follows a constant and very good acceleration without loading the engine with unnecessarily high engine speeds.

The power delivery from a standstill enables a very good start at traffic lights and hill climbing, even with a pillion rider, is fun. The noise level remains almost at a normal level. The power increase can also be realized already with the original exhaust system, which makes the cylinder a daily all-rounder.

Suitable for original exhaust systems and sports exhaust systems. The carburetor jetting must be increased accordingly to avoid piston sticking.

The delivery is complete including gasket set, the original head is still used.

Please select spare parts for this kit from the list below.

When fitting the piston rings, please ensure that the T or J marking on the ring joint of the piston ring always points upwards. Otherwise, the piston may not fit into the cylinder._{AI-translation}