Silent rubber set shock absorber/engine -LML (NOS)- Vespa Largeframe (1984-), Smallframe PK, PK S, PK XL, ETS, HP - M10, l=48mm

• Bushing length: 48mm
• Diameter inside: M10
• Rubber outside Ø: 29,5mm

Attention: This set includes a bushing with a hole for a M10 screw with shaft. Thus, the set can also be used in the older vehicles with a M9 mounting screw. Please make sure that the fork of the shock absorber does not rest on the engine housing, otherwise vibrations can be transmitted into the chassis.

TIP: For older vehicles that still use an M9 mounting screw simply convert to the more common and safer M10 screw! All you have to do is drill out the screw hole in the shock absorber fork to fit the M10 screw.
The matching bolt and nut can be found under accessories.