VMC Item number: VMC3797
VMC
325,00 €*
available immediately
Shipping weight 2,87 kg

Racing cylinder VMC ET6-60 for Vespa Smallframe engines from 50cc (with 125cc crankshaft)

displacement and power aluminum cylinder with wear-resistant Nicasil coating.
  • Bore: Ø60mm

  • Stroke: 51mm

  • Displacement: 144cc

  • Exhaust: 186° (one-piece)

  • Overflow: 126°

The cylinder has generous cross-sections and head angles. It is therefore predestined to generate a sporty performance characteristic. The cylinder can be adapted very well to the desired application via the exhaust selection. Exhaust systems such as the VMC Evo52 enable high revs, a peaky performance characteristic along with the typical 2-stroke bite. For those who prefer a touring oriented engine with early torque and good pull already from lower rpm, choose e.g. the VMC Siluro exhaust

.
  • Exhaust cross section: Ø32mm
    Distance exhaust studs: 56mm

  • Crush edge: 1.1mm (+/- 0,1mm)
    Tightening torque M6 bolts 10-11Nm, M7 nuts 11-12Nm


SPECIAL FEATURES
Since the cylinder is designed for high power output, it has a generous overcurrent area at the cylinder base. Therefore, a small amount of machining of the crankcase is required for installation. This involves removing the crescent-shaped protrusion of the fan wheel tunnel. In order to mount the large cylinder base in the engine case, the diameter of the case must be enlarged. For this purpose a milling template is included in the kit. This is mounted on the motor housing with screws and serves as a guide for a hand-held milling cutter (Dremel/Proxxon). Alternatively, the housing can also be professionally machined on a CNC milling machine.

Scope of delivery

:
  • Cylinder incl. gaskets and mounting material

  • piston incl. rings, clips, bolts

  • Milling template

AI-translation

Rate this article now and let us know what you think.
OEM numbers (for comparison purposes only)
Scooter Center:
VMC3797
VMC:
001903-F2
Avotecnica:
003797
Matching
Customers also bought