carburetor -NARAKU- 17.5mm with e-choke prep for Minarelli, Peugeot

Naraku 17.5mm carburetor for scooters with Minarelli and Minarelli based engines from Chinese production and Peugeot horizontal engines. The carburetor is recommended even for un-tuned engines, because it is much better to tune than the original carburetor. Acceleration holes and idle problems are now a thing of the past. In conjunction with a 70cc cylinder definitely recommended! Only with an appropriately large carburetor can the internal cooling of the cylinder be ensured and expensive cylinder damage is thus avoided. The carburetor has as an option a so-called carburetor heater (it can be passed in water-cooled engines cooling water).

The original air filter box can still be used.

This Naraku carburetor is equipped with M6 thread main jets and is prepared for electric choke.

Attention the original E-Choke of Keeway, CPI, Generic and Minarelli based 2-stroke vehicles from Chinese production, is not suitable. Here please order a Dellorto choke or Naraku E-Choke NK200.05, as well as the matching fixing plate BT13920.

Main jet 80 (6mm)
Secondary nozzle 38 (4mm)
Connection width intake manifold: 24mm
Connection width air filter: 35mm
Carburetor needle A12_{AI-translation}