with E-approvalMOTO NOSTRA indicators with dynamic running light for Vespa GTS.
The MOTO NOSTRA indicators have individually controlled LEDs and thus generate a fully dynamic running light, as is familiar from luxury class vehicles (e.g. Audi A7). The light effect produced is very pleasing and offers a pleasant change from conventional indicators. As an additional special feature, the indicators have facetted reflectors at the front and rear. If you are standing directly in front of or behind the vehicle, you cannot see the actual position of the LED from the outside.
SAFETY THROUGH TECHNOLOGY
This new technology increases the optical width of the rear in the dark, significantly improving visibility in road traffic. The bright LEDs of the indicators are clearly visible from a long distance. The running light is also more visible than with a conventional blinker.
LOOK
The tinted indicators offer an exclusive and elegant look. When they are not in use, they are visually discreet.
REAR LIGHT UPGRADE
The matching MOTO NOSTRA rear lights (see accessories below) have exactly the same tinting of the glass and an identical reflector design. They therefore harmonize beautifully with the indicators and together form a very successful visual and technical upgrade for the rear of the vehicle.
QUALITY
A particular concern for us was quality and fit. Both are at a very high level with the MOTO NOSTRA indicators.
In addition, the Moto Nostra indicators are always supplied with connection adapters. This means that no modifications need to be made to the wiring harness!
TÜV
The indicators naturally have a test mark and are approved for use on public roads (no TÜV approval required).
Available for front or rear in clear glass or tinted black and as an inexpensive complete set.
CONNECTION & ADAPTER FOR FRONT
The front blinker set comes with an adapter plug. This is plugged into the service plug (under the cascade) and taps the power for the position lights here. If the slot of the service plug is already occupied (e.g. alarm system), we offer a separately available cable switch (PV60CKTA). This allows both systems to be operated in parallel.
REAR CONNECTION & ADAPTER
Three adapter plugs are included with the rear blinker set. The large (BGM6606BL18) plug extends the wiring of the rear light and at the same time taps the power for the position lights, which are not fitted as standard. The extension also allows the cables to be routed in the bead below the rear light. The two small cable adapters (BGM6606GTS) are required for adapting the old connector system to the new Super-Seal system.
INDICATORS NOT WORKING?
Piaggio has reversed the polarity of the rear blinker connections on GTS models with the chassis prefix ZAPM452.
This is not a problem with conventional indicators with filament bulbs. If LED indicators are connected, they will not work. In this case, please simply use the second set of plugs supplied (with the black plugs instead of the white ones).
Important note:
When converting from bulbs to LEDs for vehicle indicators, malfunctions may occur under unfavorable circumstances due to the different resistance values of the bulbs and/or the relays installed at the factory. To avoid this from the outset, a flasher relay such as item MN6202 or BGM6202 should be used in case of doubt.
DE | €
