Postage free from 99€ (DE)
High customer satisfaction
DE | €
- Scooter 50-850cc
- Bracket for Royal Alloy Turn Signal Relay for GP, GT, JPS, TG
Genuine Royal Alloy mounting bracket for the flasher relay on GP, GT, JPS and TG models. The black-coated metal bracket serves as a vehicle-specific mounting support and allows the flasher relay to be installed in its intended position within the electrical system.
The component features a compact, right-angled design with a mounting hole and a wide, flat mounting surface. Its shape is matched to the intended installation position and allows the relay to be mounted in a space-saving manner.
The bracket is made from formed sheet metal with two sections arranged at right angles to each other. The black surface has an even, slightly textured coating.
The shorter, vertical section features a central round through-hole. This is used to bolt the mounting bracket to the intended mounting point on the vehicle.
The longer, horizontal section forms the mounting surface for the flasher relay or its holder. Its outer contour has rounded corners and lateral shaping at the free end.
This design distinguishes the genuine bracket from a simple universal mounting bracket. The dimensions and shape of the mounting surface are matched to the intended installation position.
In Royal Alloy spare parts diagrams, the component is listed under the English designations “L-Shaped Bracket” or “Bracket, Flasher”.
The dimensions specified for the bracket with original part number 0306020001-02-001 are 25 x 14 x 20 mm.
The compact design allows the flasher relay to be mounted in a confined space. The right-angled arrangement of the two sections offsets the mounting surface from the vehicle-side mounting point.
This allows the relay to be positioned as intended without the need to fabricate an additional universal mounting bracket.
The flasher relay is part of the vehicle's electrical system and controls the flashing function. The mounting bracket itself has no electrical function and is used solely for mechanically supporting and positioning the relay.
Correct mounting is important to ensure that the flasher relay remains in its intended position while the vehicle is in operation.
The bracket performs several functions:
The exact method of attaching the relay to the mounting bracket depends on the vehicle-specific configuration and the associated components.
The product images show a completely black bracket with a predominantly matt surface.
The material thickness is clearly visible along the side edges. The transition between the two sections is formed by an even bend.
The mounting hole is located in the vertical section. At the opposite end of the horizontal section, the lateral contours are slightly widened and rounded.
The black coating covers the visible outer surfaces of the bracket and provides an unobtrusive appearance within the electrical system.
The bracket is used within the electrical system of various Royal Alloy models. Original part number 0306020001-02-001 is documented, among other applications, in spare parts diagrams for the GP, JPS and TG series.
As the arrangement of electrical components may vary depending on the model and version, exact compatibility should be checked using the Royal Alloy original part number and the relevant spare parts diagram.
Before replacement, the installation position of the existing bracket should be checked. Particular attention should be paid to the orientation of the two sections and the position of the flasher relay.
The mounting bracket is bolted to the intended mounting point on the vehicle using the existing through-hole.
The mounting must be sufficiently secure to prevent the bracket from twisting or coming loose while the vehicle is in operation.
After installation, check that the flasher relay is correctly secured and that the connected cables and electrical connectors are routed without tension or kinks.
It is particularly important to ensure sufficient clearance from moving parts and other components that could mechanically affect the relay or its wiring during operation.
A bent or damaged mounting bracket should be replaced if the original positioning of the flasher relay can no longer be ensured.
The genuine Royal Alloy mounting bracket 0306020001-02-001 allows the standard mounting of the flasher relay to be restored precisely. The compact, black-coated metal construction measuring 25 x 14 x 20 mm corresponds to the intended design and allows installation at the original mounting position.
