We have tried with the help of all available manufacturer information and our years of experience to address the issue of brake components as error-free as possible,
however, this is unfortunately not 100% possible.
Depending on the availability at the time of vehicle production, the vehicle manufacturers may use different combinations of the installed components.
Therefore, we must ask you in case of doubt before ordering to check the compatibility based on the product photos and the specified dimensions.
Of course a return of wrongly ordered articles is sufficiently stamped and in the as good as new / saleable condition within the legal periods possible.
Thank you for your understanding.
NOTE: Only suitable with modifications on Piaggio SKR. The original brake disc has an inner diameter of 98mm. Unfortunately these are no longer available. Currently there are no other alternatives available. For the assembly the hub on Ø=97mm can be turned off.
Vehicle allocation for brake disc NG130 MALAGUTI CENTRO SL - 1997-2000 (front) CENTRO SL CAT - 1999-2000 (front) PIAGGIO QUARTZ 50 - 1996 (front) SFERA 50 FL RST - 1995-1997 (front) SKIPPER 80 - 1996 (front) SFERA 4T 125 - 1995-1997 (front) SKIPPER 125 - 1993-1997 (front) SKIPPER 125 ST4T - 2000 (front) SUPER HEXAGON GTX 11/12 - 2000 (rear) SUPER HEXAGON GTX 11/12 - 2000 (front) VESPA ET 4 125 - 1996-2002 (front) ZIP 125 4T - 2000-2001 (front) SKIPPER 150 - 1993-1997 (front) SKIPPER LXT 150 - 1998-2006 (front) SKIPPER ST 150 4T - 2000 (front) VESPA ET 4 150 - 1996-2002 (front) VESPA LX 150 - 2005-2008 (front) |