Atomiser -DELLORTO- SH 5899-2 - Lambretta LIS 150, TV 175, SX 200, TV 200, DL 200

Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded

Float needle -BGM PRO- suitable for DELLORTO, square, 4.5mm- SI (Vespa PX), SH (Lambretta LI Serie3, LIS, SX, TV, DL, GP), PHBH, PHBL - unsprung

Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded

Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded

Carburettor repair kit -OEM QUALITY- Dellorto SH 18, 20, 22- including float and float needle

Carburettor gasket set -BGM ORIGINAL, S- Dellorto SI - SI20/15, SI - SI20/17, SI - SI20/20, SI - SI24/24, SI - SI26/26 - Vespa PX, Sprint, Rally, VNB, VBA, VBB, VBC (Super), GT, GTR, TS, GL, LML Star/Stella 2-T

Rubber sleeve, short -LAMBRETTA- Lambretta LI, LIS, SX, TV, DL, GP, J, Lui, D, LD

Throttle cable guide -DELLORTO- M6 x 0.75 - 0° - used for carburator top cap PHBL, PHBH, PHBE, carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa

Adjuster screw -PIAGGIO- M6 x 14mm - (Øinner=6.9mm, thread pitch 0.75, used for carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa)

Cable adjuster M6 x 14mm - (Øinner=6.7mm, thread pitch 0.75) with locknut- (used for carburettor box/throttle cable Vespa VNA, VNB, VBB, Sprint150, Rally180, Rally200, PX80, PX125, PX150, PX200, Cosa)

Cable adjuster M6 x 25mm - (Øinner=7mm, thread pitch 0.75) -MB DEVELOPMENTS- stainless steel

Slide spring -DELLORTO- SHBC 19

Spring carburettor slide Dellorto SH18, SH20, SH22 --JOCKEYS BOXENSTOP- Lambretta

Nut for throttle lever -PIAGGIO- SHB - WS=8

Nut -DELLORTO- SHB - WS=7 - used for fixing air filter

Nut set M4 for air filter SHB carburetor -BGM original- Vespa V50, Primavera, ET3

Spring washer, waved -DIN 137 steel, glavanised- M4 (used for screw oil pump Vespa PX EFL, 98, My, 2011, T5 125cc, Cosa)

Spring washer, waved -DIN 137 steel, glavanised- M5

Washer -DIN 125- M4

Serrated lock washer -DIN 6798- M5

Lock washer 90° -DIN 6797- M5 (used for handle bar top screws Lambretta LI, LIS, SX, TV, DL, GP)