Mikuni Item number: TM278006
Mikuni
2 Ratings
219,00 €*
available immediately
Shipping weight 0,61 kg

MIKUNI TMX27 carburetor - 27 mm, Powerjet, oil connection, manual choke

The carburetors from the Japanese manufacturer Mikuni belong to the reference class when it comes to perfect tunability and therefore the highest achievable performance with optimum consumption. Mikuni carburetors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for tuning, as the Mikuni carburetors do not run with just any carburetor configuration, but only with the right one. But then they also run perfectly and you don't expose the engine to the risk of it only running properly in some partial load ranges and then blowing up in one of the other partial load ranges.

Thanks to the Powerjet jet, the TMX 27 also offers the possibility of tuning the carburetor leaner in the middle speed and slide range in order to gain power there and reduce consumption. In order to prevent leaning in the upper slide and speed range, the Powerjet nozzle is used there, which additionally feeds fuel into the intake flow due to the high vacuum at full throttle and high speeds.

The TMX27 is one of the few large carburetors with a connection for fresh oil. This makes this carburetor particularly interesting for large automatic engines which, despite tuning, do not want to do without an oil pump in everyday use.

Mikuni carburetors react quickly to fine fuel contamination by overflowing the float chamber. Ideally, therefore, a good fuel filter should be used here.

  • Main jet: 150
  • Idle jet: 30
  • Needle jet: N-9 ( 622 )
  • Nozzle needle: 6E20-3
  • Starter jet: fixed
  • Idle air screw: 2.0 turn
  • Main air jet: fixed
  • Power Jet nozzle: 85
  • Throttle slide: 4.0
  • Needle valve: 2.5
  • Float level: 13mm
  • Choke control: left / lever
  • idle throttle screw: left
  • Propeller: left
  • Outer diameter front: 36mm
  • Outer diameter rear: 50mm
  • Overall length: 88mm
  • Dimension center venturi upwards: 82mm
  • Dimension center venturi down: 77mm
  • Fresh oil connection: right
  • Fuel supply: left
This is how we ensure, that reviews come from real consumers.
Anonym  12/19/2015

carburateur niquel por mon suzuki 125 tsr merci

Anonym  05/02/2020

Mikuni
Great cooperation. Good carburettor for suzuki tsr 125

Carburetor
Main nozzle size
150
Main nozzle type
Mikuni (4/042)
Secondary nozzle type
Mikuni (VM22/210)
Needle type
Mikuni
Powerjet nozzle type
Mikuni (N100606)
Slider type
D-Schieber
Choke type
manuell Hebel
Connection type Intake manifold
Gummiverbindung
Position of mixture screw
links
Fuel hose position
links
Float chamber material
Metall
Size of secondary nozzle
30
Needle size
6E20
Mixing tube size
N-9 (Serie 622)
Powerjet nozzle size
85
has Powerjet
ja
Slider size
4
Depth
88 mm
Relative connection height
77 mm
Connection width air filter
50 mm
Connection width of intake manifold
36 mm
has oil connection
ja
has vacuum connection
nein
Venturi size
27 mm
Connection type Air filter
geklemmt
Position of idle throttle screw
links
 
Matching
Accessories
Matching
Customers also bought