The following components are included in this set:
Cable choke kit -BGM ORIGINAL for PWK / MIKUNI- TMX 30, TMX 32- (bgm, Stage 6, Keihin, Koso), Polini CP - metal
Cable choke kit -BGM ORIGINAL for PWK / MIKUNI- TMX 30, TMX 32- (bgm, Stage 6, Keihin, Koso), Polini CP - metal
Main jet set -BGM PRO for KEIHIN (type: 99101-357) PWK- (125-148) - (125-128-130-132-135-138-140-142-145-148)
Main jet set -BGM PRO for KEIHIN (type: 99101-357) PWK- (125-148) - (125-128-130-132-135-138-140-142-145-148)
Idle jet set -BGM PRO for KEIHIN (type: N424-21) PWK- (30-52) - (30-32-35-38-40-42-45-48-50-52)
Idle jet set -BGM PRO for KEIHIN (type: N424-21) PWK- (30-52) - (30-32-35-38-40-42-45-48-50-52)
Needle -KEIHIN PWK- JJH
Needle -KEIHIN PWK- JJH
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Throttle cable guide set (throttle cable elbow) -MALOSSI- M6 x 0.75 - 160°
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable
Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
Trunnion -UNIVERSAL- Ø=5.5mm x 7mm (used for throttle cable)
Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm
Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm
Hose clamp -UNIVERSAL- 32-50mm - band width = 12mm
Hose clamp -UNIVERSAL- 32-50mm - band width = 12mm
Intake manifold -BGM PRO Racetour- Lambretta 195-225cc- CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)
Intake manifold -BGM PRO Racetour- Lambretta 195-225cc- CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)
Carburator -POLINI- AW=34mm - Ø24mm
Carburator -POLINI- AW=34mm - Ø24mm
349,00 € *
Carburetor kits specially assembled for the RaceTour Lambretta cylinders. The carburettor kits are based on the Polini carburettors and our bgm PRO intake manifold. The manifold comes with a MB carburetor rubber and offers the maximum possible distance between the carburetor and the side cover. The carburettor is almost in the original position and straight. The original or bgm air filter box (BGM4488) can be used without any problems. The Polini carbs are also used for the Polini Thor engines for paragliders. Therefore every single carburettor including all components is tested on the flowbench by Polini. The carburettors can be tuned very well - just like the original Keihin PWK's - and convince with good consumption values.

A good starting jetting for the RT cylinders and the bgm Lambretta Big Box consists of a 45mm side jet, JJH needle on second clip from above and a 125 main jet.

Included in the delivery are the complete intake manifold, the Polini carburettor, a main and side jet set, the JJH needle, XL inner cable with additional screw nipple for the gazug roller. To keep the outer cover of the original throttle cable a 180° throttle cable guide is included. The conversion set for cable choke comes with the kit, as well as a solder nipple to adjust the choke cable to the correct size if necessary.


Hint: Please use cylinder hoods without Air Scoop or remove them from the hood.
AI-translation

Rate this article now and let us know what you think.
General
EAN
4251389105824
 
OEM numbers (for comparison purposes only)
Scooter Center:
BGM8596
bgm:
BGM8596