Clutch friction plate set -POLINI Vespa type 7 springs (Rally200, PX200, T5 125cc)- 4 friction plates (incl. springs and steel plates)

With the kit you increase the friction surface by a whopping 40%, from 2,080 mm² to 2773 mm².
In conjunction with the supplied springs, you can build a very powerful clutch. Problems can then only occur on the part of the mechanical strength of the clutch. If you want to play it safe and let the clutch fly, you should directly install a reinforced basket.
The Polini set includes the cork, the steel discs and reinforced springs. The pads fit the stock clutch without modification due to their lower height.
Before installing the clutch pads, it is recommended to let the cork discs bathe in oil for one night. This will prevent the pads from running dry and quitting the service the first time they are started.
A good tip is to use a Teflon outer cable with our braided inner cables.

As lubricant we recommend BGM Pro Street gear oil (BGM2025, meets specification API GL-3).

_{AI-translation}