back
CIF Item number: 1121041
CIF

Clutch linings -CIF- Vespa Wideframe VN1T (06001-), VN2T, VB1T, VL1T, VL2T, VL3T, Touring T1 (VD1T), Touring T2 (VD1T), Touring T3 (VD2T), GL150 ACMA (VGL1T), GL150 Touring DK (VGLA), VGLB, Hoffmann Queen (M24), Largeframe VNA1T, VNA2T (081469-)

Complete set of clutch linings for early Vespa 125 and 150 models
Scope of delivery: 3x friction plates + 3x steel plates + 6x clutch springs
Design: cleanly manufactured carrier plates and resilient lining material
Ideal for revision and reliable function in road use
Note: Oil bath clutch - soak the linings in transmission oil before installation
52,90 €*
available immediately
Shipping weight 0,34 kg
Information on product safety
Report error

Clutch facings - CIF - complete set incl. steel plates and springs - early Vespa 125 and 150

This CIF clutch lining set is designed as a complete rebuild for the classic early Vespa 125 and Vespa 150 models. The set combines clean lining material with neatly manufactured backing plates - exactly what is important for clean disconnection and reliable power transmission during an engine overhaul.

CIF Complete set 3 friction disks 3 steel disks 6 springs Vespa 125 and 150

Scope of delivery

3x friction disks (lining disks)
3x steel plates
6x clutch springs

Reference/use: Complete set according to SIM/OEM 22878 (comparative purpose).

Why a complete set?

In old clutches, springs and steel plates are often worn or distorted.
New linings plus matching steel discs ensure even friction values and clean separation.
The springs in the set restore the basic function of the clutch.

Installation and practical tips

Lubricate the linings: Soak the friction plates in transmission oil for a few hours before fitting.
Check steel disks: Pay attention to axial run-out, old parts quickly lead to chattering and poor separation.
Adjust the clutch: After the first warm-up, check the play on the cable and readjust.

Suitable for (folded in)

Vespa 125 VN1T (06001-), VN2T
Vespa 125 VNA1T, VNA2T (081469-)
Vespa 150 VB1T
Vespa 150 VL1T, VL2T, VL3T
Vespa Touring T1 (VD1T), T2 (VD1T), T3 (VD2T)
Vespa GL150 ACMA (VGL1T), GL150 Touring DK (VGLA), VGLB
Hoffmann Queen (M24)

Note: Clutch baskets and clutch packs may vary on very early vehicles/conversions. If in doubt, please measure old linings/steel disks.

Technical data

Manufacturer: CIFCIF (Italy)
TypeComplete set of clutch facings
Scope of delivery3 friction plates + 3 steel plates + 6 springs
Comparison numberSIM/OEM 22878 (for comparison purposes only)

FAQ - Clutch facings for early Vespa 125 and 150

Included are 3 friction plates, 3 steel plates and 6 clutch springs.
Yes. Friction plates should be soaked in gear oil before fitting so that they soak up directly and work cleanly.
Springs on old engines are often tired. New springs restore the basic function of the clutch and reduce slipping under load.

Conclusion

The CIF complete clutch lining set is a solid choice for overhauling classic Vespa 125 and 150 engines: 3 friction discs, 3 steel discs and 6 springs in one package - with good lining material and properly manufactured carrier plates. Ideal if the clutch needs to separate cleanly and engage reliably again.

Clutch (classic)
Clutch disk diameter
96 mm
Number of friction disks
3
Covering material
Kork (grau)
Friction disk thickness
3.25 mm
Number of steel disks
3
Number of springs
6
 
OEM numbers (for comparison purposes only)
Piaggio:
22878, 81004
Matching
Accessories
Matching
Customers also bought