Control unit injection system -MALOSSI- Forcemaster 2.1 - Vespa Sprint IGET 125-150 Euro 5, Primavera IGET 125-150 Euro 5, Piaggio Liberty IGET 125-150 Euro 5

With its completely new design, the Force Master 2.1 control unit is much easier to configure. Developing ergonomic and user-friendly products has always been a Malossi goal: Force Master 2.1 is a modern, functional and powerful product. With an interface for the K and CAN communication lines, a new user interface and an additional capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle power management: without functional limitations, it allows the engine to be pushed beyond the limit of the original rev limiter.

Technical details

Mixture adjustment
± 14 % LOW / HIGH / MID
Speed limiter: 500 to 1.250 rpm, depending on application
Temperature range = -30 °C to +80 °C
Minimum operating voltage = +7 V
Maximum operating voltage = +16 V
Average power consumption <-200 mA
Environmental protection = IP65
4 different maps:
Curve 0 (125 ccm): Original exhaust system, Malossi cylinder, original cylinder head, original camshaft, original filter
Curve 1 (125 ccm): Malossi exhaust system with DB killer, Malossi cylinder, original cylinder head, original camshaft, original filter
Curve 2 (150 cc): Original exhaust system, Malossi cylinder, original cylinder head, original camshaft, original filter
Curve 3 (150 cc): Malossi with DB killer exhaust system, Malossi cylinder, original cylinder head, original camshaft, original filter

Complete control of the mixture preparation is achieved by combining the O2 controller with the Force Master control unit. The synergy of these two devices knows no bounds: The entire quoted aircraft is managed, controlled and optimized for each processing step proposed by Malossi.

Attention:
Please install only with cylinder kit M3115695!