Cover plate for oil pump cable/oil hose in engine housing -DDL TUNING- Piaggio 125-180cc LC 2-stroke Maxi - Gilera Runner FX/FXR 125-180, Italjet Dragster 125-180 - required if the oil pump is to be removed

Cover plate from DDL Tuning for sliding into the side of the engine housing of Piaggio Maxi 2-stroke engines from 125-180cc. Used when the standard oil pump has been removed.
Originally, a rubber is fitted at this point ex works, which accommodates both the Bowden cable for controlling the load function of the oil pump and the oil hose leading to the carburetor. If the vehicle is used with a mixture lubrication system (e.g. 1:50), the oil pump can be removed (for vehicles with water cooling, also install item DDL0011). The cover plate shown here then replaces the rubber.

NOTE: The aluminum plate can also be used on vehicles WITH an oil pump. To do this, simply drill through 90% of the holes already drilled on the back and deburr the holes. The plate can then accommodate both the cable and the oil hose. An elegant replacement if the original (no longer available) rubber has been lost.

Elaborately and elegantly milled component. With circumferential O-ring to secure the component and seal.
With milled DDL logo.