Crankshaft -PINASCO 251cc Master rotary
Rotary shaft with 60mm stroke and wider rotary.
This shaft is installed in the Master 251 kit from Pinasco and is therefore a replacement for this kit.
The crank webs are wider than the standard shafts and on the clutch side is a spline, which only accepts the splined clutches (e.g.BGM8624Pi).
CNC conrod slotted top and bottom
Fine balance weights
Pole nut M12x1,25mm
Clutch nut M12x 1,5mm
(TW27.10.21)