OMG Italia Fast Flow V2.0 fuel tap with electronic reserve indicator for Lambretta - without lever
The Fast Flow fuel taps have a high flow rate and ensure a perfect supply of fuel to the carburetor even on powerful engines. They can be replaced 1:1 with the original fuel tap.
The fuel tap is available in these variants:
- TYPE WITH RESERVE POSITION
The version with reserve position corresponds to the functionality of a conventional fuel tap (open/reserve/closed). Here, the fuel tap is manually switched to reserve when the reserve level is reached. Nice feature on the side: The reserve quantity is approx. 1 liter larger than that of the original fuel tap.
- TYPE WITH ELECTRONIC RESERVE INDICATOR
We offer the version with electronic reserve indicator for both Vespa and Lambretta. This indicates when the reserve level in the tank has been reached via a warning light, just like in a car. As this type of fuel tap has no reserve position (only open/closed), there is no need to change the position while riding. An additional safety benefit is that the fuel supply is always constant. A corresponding LED for the reserve indicator can be fitted in the handlebar cover, for example.
- SPECIAL TYPE LAMBRETTA WITH 90° CONNECTION
Fast Flow fuel tap with the connection for the fuel hose facing backwards, i.e. offset by 90°. Eliminates space problems between the fuel tap and the left-hand silent block of the engine.
NOTE
The float is not suitable for fuels with a high alcohol content. Therefore, please do not use with E10/E85 fuel.
CONNECTION OF ELECTRONIC RESERVE INDICATOR
- BLUE CABLE
The blue cable is the ground connection, which is also connected to the metal body of the fuel tap. When installed in vehicles whose tank is connected to the chassis (Vespa), the blue cable is automatically connected to the frame ground.
- ORANGE CABLE
Run the orange cable from the fuel tap to the reserve light and from there to the power source. The power source must be connected to the same ground as the fuel tap (vehicle frame).
TIP
As an alternative to individual wiring with an LED indicator light, we offer an adapter plug for the SIP/Koso speedometers (see accessories). Here, the integrated reserve light is connected directly to the wiring harness of the speedometer. Simply plug it together.