back
Siem Item number: 1265940
Siem

Headlamp -SIEM Ø=135mm- PK XL/XL2 (laterally screwed) - 15W (P26S) bulb - also suitable for Bilux (Bilux lamp plug is required)

32,90 €*
available immediately
Shipping weight 0,24 kg
Information on product safety
Report error

SIEM headlight Ø 135 mm - Vespa PK XL / XL2 (laterally screwed) - P26s 15 W - Bilux compatible*

Original SIEM - Piaggio original equipment manufacturer Ø 135 mm Socket P26s for 15 W Bilux-compatible* (BA20d) with socket, without bulb DGM test mark

Technology Original SIEM headlight for PK XL / XL2, bolted to the side
Light source Single filament 15 W with P26s base (standard for 50 cc)
Bilux option Can also be used for Bilux 25/25 W or 35/35 W (BA20d)*
Parking light Integrated BA9s socket
Material Lens plastic, clear
Homologation DGM test mark
Delivery condition with socket, without bulb
Mounting Side screw connection as standard, plug and play

Description

Original SIEM headlight in Ø 135 mm format for Vespa PK XL / XL2 with side screw fitting. Designed ex works for the 15 W single filament bulb (P26s) commonly used for 50 cc and fitted with BA9s parking light socket. The clear plastic diffusing lens and the DGM test mark correspond to the original standard.

Bilux use*

The headlight can alternatively be operated with Bilux bulbs 25/25 W or 35/35 W ( BA20d base). A suitable Bilux bulb holder is required for this (no longer available, continue to use existing old part). Please observe the vehicle's on-board voltage and regulator output.

Installation

Installation in the PK XL / XL2 lamp pot via the side screw connection as with the standard part. Make sure the contacts and earth points are clean, lock the lamp plug correctly. Bulbs are not included in the scope of delivery.

Model Note
Vespa PK 50 / 80 / 100 / 125 XLLaterally screwed insert Ø 135 mm
Vespa PK 50 / 125 XL2Side bolted insert Ø 135 mm

Not for PK S with different mounting or design. Check lamp pot and mounting type before ordering.

Key technical data

Lamp diameterØ 135 mm
Diffusing lensPlastic, clear
Low beam socketP26s (single filament 15 W)
Parking light socketBA9s
Bilux-compatible*BA20d 25/25 W or 35/35 W, separate Bilux socket required*
HomologationDGM test mark
Scope of deliveryHeadlight with socket, without bulb
MountingSide screw connection

Scope of delivery

HeadlightSIEM Ø 135 mm, PK XL / XL2, bolted to the side
SocketsP26s low beam and BA9s parking light pre-assembled
No. The headlight is supplied without bulbs. Please order suitable P26s 15 W and BA9s parking light separately.
A BA20d Bilux bulb holder is required (see accessories).
This insert is designed for PK XL / XL2 with side screw fitting. Other PK variants may differ.

*Bilux operation only with suitable BA20d socket. Note on-board power supply and regulator output.

Rate this article now and let us know what you think.
Rate this product now
OEM numbers (for comparison purposes only)
Piaggio:
265940
Matching
Spare parts
Matching
Accessories