Motogadget Item number: 3333505
Motogadget
49,00 €*
available immediately
Shipping weight 0,021 kg

Details

The m.wave is the first digital flasher relay with Fade in/Fade out effect. And additionally extremely small and load-independent.

It lets every flashing light fade in and out softly - even LED flashers! A new style and look when flashing - cool design for the flashing light.

Hard switching flashing lights, especially LED flashers turn on and off stupidly and boringly - with the m.wave they let the flashers shine like waves. An absolutely new look of the flashing light - ultra small and light, practically only a piece of cable with a tiny device in candy size. Ideal for any kind of converted and styled motorcycle or car to attract more attention.

Advantages

  • Unique fade-in/fade-out effect
  • Ultra small and light, practically just a piece of cable with a tiny candy-sized device
  • Ideal for custom bikes and conversions with limited space - bulky standard flasher relays or load resistors are a thing of the past
  • Laying them down is a thing of the paste.g. in the handlebar tube, frame tube or in the cable harness possible
  • Virtually load-independent (min. 1 watt)
  • Works completely with digital semiconductor technology Control via microprocessor. No mechanics, no coils, no contacts
  • Always constant and correct flashing frequency therefore suitable for almost all LED-flashers, all micro-flashers, halogen flashers, 10 Watt flashers, 21 Watt flashers
  • Functional e.g. with 4 flashing lights or 2 handlebar end flashers
  • Instant, loss-free, brighter illumination of the flashing lights
  • Super easy connection only via two cables - simply connect in series
  • Absolutely waterproof and vibration-resistant because completely encapsulated
  • Short circuit proof, automatic overload protection. Switches up to 100 Watt power.
  • no heat development during operation
  • operating voltage already from 5V to 18V
  • also suitable for 6V flashers
  • quality 'made in Germany' - from motogadget

notes

the simplest possibility, to install the m-Flash, the original relay must be found and simply replaced with the m-Flash.

The m.wave can NOT replace the push button control when using push button fittings. See product m-Relay+ if you are looking for a flasher relay for push buttons.

On newer models from Harley-Davidson™ the flasher control is controlled by a special module (TSM/TSSM). The m-Flash can unfortunately NOT replace or supplement these modules.

Specifications and Features

  • Housing L x W x H 18 mm x 13 mm x 9.5 mm
  • Length of connection cable approx. 2 x 50 mm
  • weight approx. 4 g

AI-translation

Rate this article now and let us know what you think.
OEM numbers (for comparison purposes only)
Scooter Center:
3333505