Intake manifold -RLC Maxi Flusso- Lambretta 195-225cc- CS=Ø34mm (carburetors Ø28-30mm - PHBH, VHSH, PWK28, TMX30, Smartcarb 26-28)

Maxi Flusso Lambretta intake manifold from Rimini Lambretta Centre for all piston operated Lambretta cylinders. Herewith carburetors with 34 mm connection width can be installed.
Carburetors like:

• Keihin PWK 28
• Dellorto PHBH 28
• Dellorto PHBH 30
• Dellorto VHST
• Mikuni TM30

If necessary the original air filter box can be further used with this intake. For optimum power output, the optimized bgm air filter box (BGM4488) is recommended.

The sealing surfaces of the intake manifold and cylinder inlet may have to be adapted to each other. To do this, it is best to use an intake gasket as a template and match the areas with the Dremel.

An M7 screw is included in the scope of delivery to replace the long stud bolt. When using the screw, the engine does not have to be lowered to dismantle the intake.

You can find suitable connecting rubbers under the article numbers: 1110024, 7670781 or 1110020._{AI-translation}