back

Show all articles from: Gasket

OEM-Qualität Item number: 8002030

Oil seal 33x50x6mm (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

6,90 €*

available immediately

Shipping weight 0,024 kg

Information on product safety

Oil seal 33x50x6. The oil seal is used on the drive side above the 6305 bearing on all Lambretta Series 1-3 scooters.
_{AI-translation}

Rate this article now and let us know what you think.

Rate this product now

Shaft seals

Inner diameter

33

Outside diameter

50

Width

6

Dimensions

33x50x6

Material

NBR

Coating

keine

OEM numbers (for comparison purposes only)

Innocenti:

19012008

Matching

Accessories

Liquid gasket -ELRING Dirko HT red- 70ml

Liquid gasket -ELRING Dirko HT red- 70ml

Ball bearing -6305 2RS (both sides sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Ball bearing -6305 2RS (both sides sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 0.5mm

MB-Developments

MB-Developments
7671212

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 0.5mm

Engine gasket set -MB DEVELOPMENTS- Lambretta SX 225 (TS1), TV 225 (TS1), DL/GP 225 (TS1)

MB-Developments

MB-Developments
7671580

Engine gasket set -MB DEVELOPMENTS- Lambretta SX 225 (TS1), TV 225 (TS1), DL/GP 225 (TS1)

Ball bearing -6305 1RS (single side sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Ball bearing -6305 1RS (single side sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Gasket remover -BGM ORIGINAL- 23mm

BGM ORIGINAL
7673834

Gasket remover -BGM ORIGINAL- 23mm

Shim -DIN 988- 50x62x0.1 (used for ball bearing 6305, 613912)

Normfest
7674016

Shim -DIN 988- 50x62x0.1 (used for ball bearing 6305, 613912)

Shim -DIN 988- 50x62x0.2 (used for ball bearing 6305, 613912)

Normfest
7674017

Shim -DIN 988- 50x62x0.2 (used for ball bearing 6305, 613912)

Shim -DIN 988- 50x62x0.3 (used for ball bearing 6305, 613912)

Normfest
7674018

Shim -DIN 988- 50x62x0.3 (used for ball bearing 6305, 613912)

Shim set -DIN 988- 50x62 (used for ball bearing 6305, 613912)

Normfest
7674022

Shim set -DIN 988- 50x62 (used for ball bearing 6305, 613912)

Shim -DIN 988 similar- 31x26x1.0mm (used for ball bearing 6305)

BGM ORIGINAL
7674074

Shim -DIN 988 similar- 31x26x1.0mm (used for ball bearing 6305)

Gasket remover -NORMFEST Seal-Ex- 400ml

Normfest
7675219

Gasket remover -NORMFEST Seal-Ex- 400ml

Liquid gasket -NORMFEST Plastomar- 85 g

Normfest
7675222

Liquid gasket -NORMFEST Plastomar- 85 g

Allen screw counter sunk bolt -DIN 7991- M6 x 16mm (used for cover plate crankshaft bearing drive side Lambretta LI, LIS, SX, TV (Serie 2-3), DL, GP, J, Lui, used for cover plate clutch bearing Lambretta A, B, C, LC, D, LD)

Normfest
8002040

Allen screw counter sunk bolt -DIN 7991- M6 x 16mm (used for cover plate crankshaft bearing drive side Lambretta LI, LIS, SX, TV (Serie 2-3), DL, GP, J, Lui, used for cover plate clutch bearing Lambretta A, B, C, LC, D, LD)

Crankcase gasket/6305 -OEM QUALITY- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP

Casa Lambretta
8002060

Crankcase gasket/6305 -OEM QUALITY- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP

Ball bearing -6305- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Ball bearing -6305- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal 33x52x6mm (used for crankshaft flywheel side inner Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

Corteco
8002130

Oil seal 33x52x6mm (used for crankshaft flywheel side inner Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

O-ring 12.0x2.50mm (used for clutch-/gear change shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Casa Lambretta
8003070

O-ring 12.0x2.50mm (used for clutch-/gear change shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

O-ring 22.0x2.00mm (used for layshaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Casa Lambretta
8004410

O-ring 22.0x2.00mm (used for layshaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Gasket crankcase/maghouse -OEM QUALITY- Lambretta LI. LIS, SX, TV (series 2-3), DL/GP

OEM-Qualität
8005020

Gasket crankcase/maghouse -OEM QUALITY- Lambretta LI. LIS, SX, TV (series 2-3), DL/GP

Engine gasket set -IMPORT- Lambretta SX 200, TV 200, DL/GP 200

Engine gasket set -IMPORT- Lambretta SX 200, TV 200, DL/GP 200

Engine gasket set -IMPORT- Lambretta LI 150, LIS 150, SX 150 DL/GP 150

Engine gasket set -IMPORT- Lambretta LI 150, LIS 150, SX 150 DL/GP 150

Oil seal 25x42x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft flywheel side outer Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

BGM PRO
BGM1037

Oil seal 25x42x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft flywheel side outer Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

Oil seal 33x52x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft, inner flywheel side Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

BGM PRO
BGM1039

Oil seal 33x52x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft, inner flywheel side Lambretta LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP)

Oil seal 22x32x5,5mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))

BGM PRO
BGM1045

Oil seal 22x32x5,5mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for kickstarter shaft Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - rear hub Minarelli 50 cc (type MA, MY, CW, CA, CY))

Oil seal 32x45x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Lambretta LI, LIS, SX, TV (series 2-3). DL, GP)

BGM PRO
BGM1046

Oil seal 32x45x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for rear hub Lambretta LI, LIS, SX, TV (series 2-3). DL, GP)

Seal drift tool -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - Ø=47mm

MB-Developments

MB-Developments
MRB0013

Seal drift tool -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - Ø=47mm

Matching

Alternative products

Oil seal set -MB Developments- Lambretta LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL - crank shaft oil seals FKM

MB-Developments

MB-Developments
7900135

Oil seal set -MB Developments- Lambretta LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL - crank shaft oil seals FKM

Oil seal 33x50x6mm -MB DEVELOPMENTS Race Tour (FKM)- (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

MB-Developments

MB-Developments
8002031

Oil seal 33x50x6mm -MB DEVELOPMENTS Race Tour (FKM)- (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal set engine -LAMBRETTA- LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL

Oil seal set engine -LAMBRETTA- LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL

Oil seal 33x50x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

BGM PRO
BGM1038

Oil seal 33x50x6mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Lambretta LI 125-150 (Serie 2-3), LIS, SX, TV (Serie 2-3), GP/DL

BGM PRO
BGM1141

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Lambretta LI 125-150 (Serie 2-3), LIS, SX, TV (Serie 2-3), GP/DL

Matching

Customers also bought

Drive side oilseal retainer plate for bearing 6305 with O-ring -CASA PERFORMANCE- Lambretta LI, LIS, SX, TV (2nd-3rd series)

Casa Performance

Casa Performance
3331757

Drive side oilseal retainer plate for bearing 6305 with O-ring -CASA PERFORMANCE- Lambretta LI, LIS, SX, TV (2nd-3rd series)

O-ring for drive side oil seal retainer plate (ball bearing 6305) -CASA PERFORMANCE- Lambretta LI, LIS, SX, TV (series 2-3)

Casa Performance

Casa Performance
3331757R

O-ring for drive side oil seal retainer plate (ball bearing 6305) -CASA PERFORMANCE- Lambretta LI, LIS, SX, TV (series 2-3)

HT coil/CDI support -OEM QUALITY- Lambretta LI (series 1 (1959-), series 2, series 3), LIS, SX, TV (series 3), DL, GP

OEM-Qualität
3333450

HT coil/CDI support -OEM QUALITY- Lambretta LI (series 1 (1959-), series 2, series 3), LIS, SX, TV (series 3), DL, GP

Mounting set HT coil -OEM QUALITY- Lambretta LI (series 1 (1959-), series 2, series 3), LIS, SX, TV (series 3), DL, GP

OEM-Qualität
3333451

Mounting set HT coil -OEM QUALITY- Lambretta LI (series 1 (1959-), series 2, series 3), LIS, SX, TV (series 3), DL, GP

Liquid gasket -ELRING Dirko HT red- 70ml

Liquid gasket -ELRING Dirko HT red- 70ml

Tail light -BGM PRO LED- LAMBRETTA reflector only- Lambretta LI 2nd series, 3rd series (1961-), LI Special, SX, TV 2nd series, 3rd series (1961-) - 12V

BGM PRO
7670923

Tail light -BGM PRO LED- LAMBRETTA reflector only- Lambretta LI 2nd series, 3rd series (1961-), LI Special, SX, TV 2nd series, 3rd series (1961-) - 12V

Spring washer, waved -similar to DIN 137 steel, glavanised- M12 -CASA LAMBRETTA- (used as flywheel washer for Lambretta LI, LIS, SX, TV)

Casa Lambretta
7674749

Spring washer, waved -similar to DIN 137 steel, glavanised- M12 -CASA LAMBRETTA- (used as flywheel washer for Lambretta LI, LIS, SX, TV)

Woodruff key -PIAGGIO DIN6888- 4 x 6.5 (used for crankshaft/clutch side Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, crankshaft/flywheel side Lambretta LI, LIS, SX, TV, DL, GP, Piaggio 250-300cc 4-stroke)

Piaggio
7675020

Woodruff key -PIAGGIO DIN6888- 4 x 6.5 (used for crankshaft/clutch side Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, crankshaft/flywheel side Lambretta LI, LIS, SX, TV, DL, GP, Piaggio 250-300cc 4-stroke)

Trunnion set -STRAIGHTJACKETS - Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Straightjackets

Straightjackets
7677103

Trunnion set -STRAIGHTJACKETS - Lambretta LI, LIS, SX, TV (series 2-3), DL, GP

Crankcase gasket/6305 -OEM QUALITY- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP

Casa Lambretta
8002060

Crankcase gasket/6305 -OEM QUALITY- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP

Ball bearing -6305- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Ball bearing -6305- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Cup washer -LAMBRETTA- LI, LIS, SX, TV (series 2-3), DL, GP

Casa Lambretta
8002080

Cup washer -LAMBRETTA- LI, LIS, SX, TV (series 2-3), DL, GP

Oil seal 33x50x6mm (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal 33x50x6mm (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal 33x50x6mm (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)