original Piaggio kickstart spring. Supports itself inside the alternator-side motor housing and ensures that the kick starter moves back to its original position after the motor has started. Rather rarely defective or worn out but indispensable for every engine.
Assembly tip: Before assembly, remove the stop rubbers of the kick starter segment in the engine housing (these can be replaced directly). This way you create a little more space and you don't need so much effort to pretension the spring. Before the first ride always check if the kickstarter retracts automatically. The kick starter shaft is sealed by an O-ring in the guide. Do not forget this ring during an engine revision.
DE | €
