Postage free from 99€ (DE)
High customer satisfaction
DE | €
- Vespa Classic
- Rear silencer -TAFFSPEED- MK4 - Vespa PX, Rally, Sprint, T5, Motovespa, LML
Service-friendly TAFFSPEED MK4 rear silencer with Scooter Center Engraving, circlip lock, 4-hole flange, seals and fastening screws.
The TAFFSPEED MK4 rear silencer is the right silencer for the classic TAFFSPEED MK4 resonance exhaust system and can also be used on other exhaust systems as long as the mounting flange fits. The silencer has a 4-hole flange with a bolt circle Ø 55 mm and a bolt spacing of approx. 40 mm. It also has the typical 90s look, a service-friendly design and the engraved marking "TAFFSPEED Bsau 192A 1990 T3 Scooter Center". The snap ring lock allows the damper to be opened quickly and re-insulated if necessary.
The TAFFSPEED MK4 is one of the well-known British retro resonance exhaust systems for Vespa Largeframe. The rear silencer not only shapes the look of the system, but also its maintenance, sound and suitability for everyday use. Especially with older systems or after a long period of use, a fresh, cleanly insulated rear silencer can make the exhaust much more pleasant and technically consistent.
The silencer is closed with a circlip. This makes it much easier to open than riveted or permanently closed silencers. The insulation wool can be replaced if necessary, for example if the exhaust becomes louder over time or the insulation has aged thermally and mechanically.
| Overall length | 255 mm |
|---|---|
| Muffler diameter | Ø 85 mm |
| Screen tube diameter | Ø 30 mm |
| Tailpipe diameter | Ø 26 mm |
| weight | 840 g |
| Mounting | 4-hole flange, LK Ø 55 mm, screw spacing approx. 40 mm |
The rear silencer bears the engraving "TAFFSPEED Bsau 192A 1990 T3 Scooter Center". This marking picks up on the historical connection between TAFFSPEED, Scooter Center and the classic MK4 environment. This means that the silencer matches the system visually and historically and adds an important detail to the exhaust.
This article is the rear silencer for the TAFFSPEED MK4 system, not the complete exhaust. However, it can also be used on other exhaust systems if they have a suitable mounting hole stitch.
| Vespa P80X / PX80 E | with matching TAFFSPEED MK4 system |
|---|---|
| Vespa P125X / PX125 E | with matching TAFFSPEED MK4 system |
| Vespa P150X / PX150 E | with matching TAFFSPEED MK4 system |
| Vespa P200E / PX200 E | with matching TAFFSPEED MK4 system |
| Vespa PX Lusso / EFL / Arcobaleno / MY | 80-200 ccm, with matching TAFFSPEED MK4 system |
| Vespa 125 GT / GTR / TS | with matching TAFFSPEED MK4 system |
|---|---|
| Vespa 150 Sprint / Sprint Veloce | with matching TAFFSPEED MK4 system |
| Vespa 125 / 150 Super | with matching TAFFSPEED MK4 system |
| Vespa 180 Rally / 200 Rally | with matching TAFFSPEED MK4 system |
| Vespa T5 / T5 Classic | with matching TAFFSPEED MK4 system |
|---|---|
| LML Star / Stella 125-150 2T | with matching TAFFSPEED MK4 system |
| Motovespa PX / Iris / TX / T5 | with matching TAFFSPEED MK4 system |
Note: The rear silencer is linked to the TAFFSPEED MK4 system. For mixed systems, old systems or systems from other manufacturers, please compare connection dimensions, bracket position and alignment before ordering.
| Manufacturer of | TAFFSPEED |
|---|---|
| Model | MK4 |
| Type | rear silencer |
| Overall length | 255 mm |
| diameter | Ø 85 mm |
| Screen pipe diameter | Ø 30 mm |
| Tailpipe diameter | Ø 26 mm |
| weight | 840 g |
| Mounting | 4-hole flange, LK Ø 55 mm, screw spacing approx. 40 mm |
| Closure | Snap ring, easy to open |
| Service | Can be quickly re-insulated |
| Engraving | TAFFSPEED Bsau 192A 1990 T3 Scooter Center |
| Scope of delivery | Rear silencer including high-quality seals and fastening screws |
The TAFFSPEED MK4 rear silencer is the perfect service and spare part for classic MK4 systems on Vespa PX, Rally, Sprint, T5, Motovespa and LML. Thanks to the 4-hole flange with LK Ø 55 mm and approx. 40 mm bolt spacing, it can also be used on other exhaust systems, provided the connection and mounting fit. With a weight of 840 g, circlip lock, simple re-insulation, Scooter Center engraving and supplied seals and fastening screws, the damper remains visually authentic and can be maintained in the long term.
