back
Egig Performance Egig Performance: EGIG05PRIM

Retaining Ring (Primary) + 0.5 mm Spacer -EGIG PERFORMANCE- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SSPK50 HP, PK50 SS

Retaining ring for axial fixation of the primary ring in the 16005 ball bearing, including a 0.5-mm spacer to compensate for existing play.

Key Specifications

Manufacturer: EGIG PERFORMANCE
Application: Axial locking of the primary
Bearing: for 16005 ball bearing
Spacer: 0.5 mm thick
Function: Compensates for axial play
Included: Retaining ring and spacer
Compatible with: Vespa V50, PV125, ET3, and PK Smallframe
8,90 €*
available immediately
Shipping weight 0,004 kg
Information on product safety
Report error

EGIG Retaining Ring for the Vespa Small Frame Primary

The EGIG PERFORMANCE retaining ring secures the primary shaft axially in ball bearing 16005. The included 0.5 mm-thick spacer can be used to compensate for any existing play.

A correctly adjusted axial fit prevents the primary drive cage from shifting sideways and coming into contact with the clutch. The spacer is only used if the actual amount of play requires it.

Function

Secures the primary basket in ball bearing 16005
Limits the axial movement of the primary basket
0.5-mm spacer to compensate for existing play
Can prevent contact between the primary basket and the clutch

Technical Specifications

Manufacturer EGIG PERFORMANCE
Part Retaining ring with spacer
Application Primary drive for Vespa Smallframe
Bearing 16005
Spacer thickness 0.5 mm

Compatible Vehicles

Suitable for Vespa small-frame engines with the corresponding primary drive and bearing configuration, including:

Vespa V50, V90, SS50, and SS90
Vespa PV125 and ET3
Vespa PK50, PK80, and PK125
Vespa PK S, PK XL, ETS, HP, and SS

What’s Included

1x retaining ring for the primary drive
1x spacer, 0.5 mm

Installation Instructions

Check the axial play of the primary drive before final installation
Use the 0.5-mm spacer only if there is sufficient play
Insert the retaining ring fully into the designated groove
Check that the ring is seated correctly around the entire circumference
Check that the primary and clutch rotate freely after installation

FAQ

The spacer compensates for any axial play in the primary, if necessary. This prevents the primary cage from moving too far toward the clutch.
No. The spacer is only used if the measured axial play requires an additional 0.5 mm of compensation.
The set is designed for the axial locking of the primary in ball bearing 16005.
Matching
Accessories
Matching
Customers also bought
Top