Headlight Trim Ring Royal Alloy – Chrome – GP and TG 125–350 cc
The chrome headlight trim ring from Royal Alloy forms the outer finishing edge of the round headlight assembly and is a distinctive feature of the front design of the GP and TG model ranges. Its unique shape combines a circular headlight opening with a slightly angular outer contour. The high-gloss chrome finish accentuates these lines and adds a classic touch to the handlebar cover.
As a genuine Royal Alloy replacement part, the trim ring is intended to replace a damaged or visually deteriorated headlight surround. It is also suitable for restoring the original appearance of the vehicle during repairs and restoration work.
Distinctive Shape with a High-Gloss Chrome Finish
Unlike a simple circular headlight ring, this component features a distinctive three-dimensional contour. The upper section forms a broad curve with slightly flattened transitions. Towards the sides and lower section, the shape continues into a smoothly curved surround.
The wide, outwardly curved visible surface has a full high-gloss chrome finish. Depending on the angle of the light, pronounced reflections highlight the contours of the headlight surround. The narrow continuous edge creates a clearly defined transition to the adjacent bodywork.
Vehicle-Specific Mounting
Several integrated mounting tabs are located on the rear, arranged along the inner circumference and outer contour. Depending on their position, the tabs feature round or rectangular mounting openings and are used to locate or secure the trim ring at the designated mounting points.
The three-dimensional shape of the rear follows the contour of the headlight mounting area. This allows the trim ring to be integrated into the corresponding front bodywork without altering the vehicle's characteristic design.
The trim ring is a separate bodywork component. The actual headlight assembly, including the lens, reflector and bulbs or LED technology, is not part of this component.
Technical Features
- Genuine Royal Alloy headlight trim ring
- High-gloss chrome finish
- For vehicle models with a round headlight
- Circular headlight opening with a slightly angular outer contour
- Wide, three-dimensionally curved visible surface
- Narrow continuous finishing edge
- Several rear mounting tabs with round and rectangular openings
- Vehicle-specific shape for the original headlight mounting area
- Separate bodywork component without headlight assembly
- Royal Alloy genuine part numbers: 0312010011-10-001, 0312010011-10-045
Suitable for Royal Alloy
- Royal Alloy GP 125–350 cc, models with round headlight
- Royal Alloy TG 125–350 cc
Installation Notes
Before installation, the existing headlight shape, the contour of the handlebar cover and the arrangement of the mounting points should be compared with the replacement part. Particularly within the Royal Alloy GP model range, a distinction must be made between vehicle versions with round and rectangular headlights.
When removing the existing trim ring, care should be taken not to damage the adjacent bodywork panels or mounting points. The mounting tabs of the new trim ring must be correctly positioned in their designated locations during installation.
Compatibility can also be checked using the Royal Alloy genuine part numbers 0312010011-10-001 and 0312010011-10-045.
With its reflective chrome finish and model-specific contour, the genuine headlight trim ring restores a distinctive detail of the classic Royal Alloy front design. A precisely shaped replacement part for anyone who values preserving the original appearance of their GP or TG model when replacing bodywork components.
DE | €
