Original Royal Alloy indicator for the front right installation position in the legshield of Royal Alloy GP 125-300 models. The complete indicator unit is vehicle-specific and corresponds to the intended standard version in terms of shape, mounting and electrical connection. The Royal Alloy part number is 0311070005-02-001.
Unlike externally mounted indicators, this version is integrated directly into the legshield. The elongated, narrow format follows the designated opening and forms a compact unit together with the clear indicator lens.
The product image clearly shows the characteristic upright design of the indicator. The clear indicator lens has a narrow, slightly curved contour and reveals the segmented internal reflector structure. Several individual light elements are arranged vertically inside the indicator.
A black housing is located behind the transparent front section and accommodates the technical components at the rear. This construction is specifically designed for installation in the legshield of Royal Alloy GP models.
This spare part is the right-hand version. The installation position is therefore clearly assigned to the right-hand side of the front legshield. When replacing the indicator, the correct side must be observed, as the indicator units are designed according to their respective mounting positions.
The black base housing incorporates the mounting points required for installation. A mounting tab with a hole is visible in the lower section. This construction allows the indicator unit to be secured within the designated mounting position in the legshield.
The electrical connection cable is permanently attached to the indicator unit. It exits from the rear of the housing and divides into two individual wires at the end, each fitted with a pre-installed connector.
The front right indicator is intended as a direct replacement for the corresponding indicator unit in the legshield. As an original Royal Alloy spare part, it provides the model-specific housing shape, required mounting points and prepared electrical connection for the designated installation position.
DE | €
