Screw set for tool box -MAURO PASCOLI 2x M5 x 25mm- Vespa PX, Rally180, Rally200, TS125, GS160 / GS4 (since VSB1T0054684), SS180

Screw set for fastening the luggage compartment / glove compartment to the frame.
Is inserted from the fender side below the cascade through the two holes of the main frame and locked at the back.

TIP:
The PX models use a total of 4 screws, here the set is needed 2x.

The older models such as Rally, Sprint etc. use this type of screw only for the lower mounting brackets, i.e. here only 1 set is needed. The upper hexagonal fixing bolts are located in welded-on sheet metal pockets and are secured against turning by the rectangular shape of the pockets. If a luggage compartment is to be retrofitted on models without such a compartment, these pockets (not available as a spare part) must be manufactured and welded on, and the holes for this screw set must be drilled in the frame.

This should ideally be done before painting a restoration.

_{AI-translation}