Seat cover -X-TREME- Piaggio Vespa ET2 / ET4 - black

Seat cover for the professional refurbishment of a defective seat.

Our X-treme seat covers are manufactured in Europe and correspond to the original used seat. For mounting the old seat cover must be removed. This is either glued and/or fixed with clamps to the seat frame.

So that the cover can be mounted on the bench frame without wrinkles like the original, it is manufactured very true to size. Therefore it seems to be too small at first sight.
For a perfect and wrinkle-free installation, it is therefore necessary to fasten the cover with the appropriate pre-tension. This is often best done by two people and with the appropriate holding tool (e.g. grip pliers with plastic jaws).

TIP: Often the cover of a professional is usually not expensive if the preparatory work (remove old cover, clean the seat, etc.) have already been made. Look for a saddler or upholstery shop in your area.