SPACER FOR CYLINDER COVER PX200 Converting a 125/150cc engine housing to a 200cc cylinder using our conversion kits (SC80200SET, SC80210SET) moves the cylinder 15 mm higher. Due to this significant raising of the cylinder, the cooling cover usually has to be extended accordingly. We simply used two hoods and cut off the lower third of one of them. We then connected this to the complete other hood using conventional self-tapping screws.
SHEET METAL STRIPS A more attractive solution is to extend the hood using a sheet metal strip. This is simply bent by hand to fit the contour of the cylinder cover at the lower end and riveted to it and/or glued with a mounting adhesive (sikaflex).