Spacer set for Silentblock engine -BGM PRO, w=7.5mm- Vespa PX125-200, Vespa Rally200 (VSE1T) (2nd series) - used for motor housing Malossi V-One/VR-One

Some Malossi V-One/VR-One engine housings have very deep drilled slots for the silent rubbers in the cross beam. To prevent the motor from moving sideways and possibly touching the chassis, we offer appropriate spacer bushings.

ASSEMBLY
These spacer bushings are inserted into the housing first, replacing the original steel washers as used in the Piaggio engine housings. Then the silent rubbers are inserted, rubbing them with a little talcum if necessary.

MATERIAL
The bushings are made of wear-resistant polyamide