SPARE WHEEL HOLDER FOR STEP-THROUGH -RUSTY FARTS- VESPA WIDEFRAME/LARGEFRAME 8 INCH TYRES
The fantastic look of the 6-day racers now also for your Vespa! Suitable for e.g. Sei Giorni, Lampe Unten, ACMA, Douglas, Hoffmann, Allstate, GS150, VNA/VNB, VBA/VBB, Super etc.
Mounting lengthwise to the direction of travel on the tunnel, similar to the Vespa 6-day racer
Material aluminium, 1,5 mm thick, machine-lasered and bent
2 parts, consisting of an upper and a lower part
including 2 leather straps for lashing the wheel
Made in Germany
The upper part is screwed under the saddle (same fixing screw).
The lower part can be adjusted/bent by hand to the curve of the tunnel and fixed here (screws, rivets etc.) after shortening the middle step bar (with lamp below, ACMA etc.).
On models with a factory fitted spare wheel holder on the tunnel, the 2 original holes can be used at the top (VNB, VBB etc.). Depending on the make of tyre used (these vary somewhat in width) the lugs for fixing the wheel must be bent up a little, this is easy to do by hand thanks to the aluminium.
The holders have also been successfully mounted on VNB, etc. and GS150 (10 inch), depending on the model, the hole of the upper holder may need to be adjusted slightly.
The color of the supplied leather straps (Made in Germany) is beige and can be easily repatinated if necessary. Red or black leather straps can also be supplied on request.
Scope of delivery: Spare wheel holder (upper and lower part, 2 pieces of leather straps beige)
AI-translation
DE | €
