The Polini swingarm bearing set is the perfect solution for overhauling the bearing between the steering tube and front swingarm on Vespa and Piaggio models with a single-sided swingarm. It is precisely at this point that enormous forces act from all directions - an intact bearing is essential for safe and precise wheel guidance.
The connection transmits the steering impulse directly to the front wheel and is therefore also TÜV-compliant. The bearings are fixed in place with pressed-in locking cramps. The bearing bolt is permanently installed in the steering tube, runs on needle bearings in the aluminum swingarm and is reliably sealed by O-rings and V-rings.
If the seals become brittle due to ageing, water can penetrate and destroy the needle bearings in the long term - an overhaul is then unavoidable.
Scope of delivery:
Complete bearing set for connecting the swing arm and head tube - suitable for all Vespa/Piaggio models with single-sided swing arm from 1984 onwards.
Technical data:
This bearing set ensures precise steering behavior, reliable sealing and maximum safety - ideal for everyday use, restoration or MOT preparation.
DE | €
