back

Show all articles from: Cable pulls & sets

BGM ORIGINAL Item number: 4350007

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable

20 Ratings

4,90 €*

available immediately

Shipping weight 0,02 kg

Information on product safety

Throttle cable inside small nipple HQ braided 250cm.

Internal throttle cable, which can absorb even higher forces and runs extremely soft in the outer shell. Therefore, the braided cables are not suitable for shifting, because they work not only on pull but also to a small extent on pressure.
_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Tobias C. 10/05/2025

Kim L. 07/31/2025

Anonym 05/14/2019

Excellent Product

Anonym 10/14/2016

Gut als eserveteil geeignet.

Anonym 10/14/2016

Geflochten! Höchste Güte.

Anonym 10/14/2016

Reserve

Anonym 10/14/2016

Standard

Anonym 10/14/2016

Standardteil, passt wie erwartet.

Anonym 02/23/2016

****

Anonym 02/23/2016

Exactly as described, good quality.

Anonym 02/23/2016

Sehr gut

Anonym 11/17/2015

Gute Qualität, Montageerleichterung durch gepressten Nippel

Cable pulls

Cable pull type

innen

Wire gauge

1.2 mm

Wire type

geflochten

Dimensions upper end piece

3,0 x 3,1 [mm]

Cable pull length

250 cm

General

EAN

4251389101314

Matching

Spare parts

Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm

OEM-Qualität

OEM-Qualität
7672504

Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Titanium grease -HANSELINE- bicycle grease, Bowden cable grease, 20ml syringe

Hanseline
3332036

Titanium grease -HANSELINE- bicycle grease, Bowden cable grease, 20ml syringe

Bearing grease -HANSELINE- 50g

Hanseline
3600012

Bearing grease -HANSELINE- 50g

Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm

OEM-Qualität
7672504

Solder fitting -UNIVERSAL- fitting Ø=3.0mm x 3mm

Cable pull pliers for gear, clutch and brake cable -ICETOOLZ-

Icetoolz
7673530

Cable pull pliers for gear, clutch and brake cable -ICETOOLZ-

Lithium Grease - MOTOREX 176GP - 250g - water-repellent grease for steering head bearings, throttle tube, gas tube, main stand, and swingarm bearings

Motorex
7673780

Lithium Grease - MOTOREX 176GP - 250g - water-repellent grease for steering head bearings, throttle tube, gas tube, main stand, and swingarm bearings

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Motorex
7673781

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Spray grease -MOTOREX Grease spray- 500ml

Motorex
7673794

Spray grease -MOTOREX Grease spray- 500ml

Adjuster screw and trunnion set -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GL150 (VLA1T), VNA, VBA, VBA, VBB, V50, V90, PV 125

BGM ORIGINAL
BGM6464N

Adjuster screw and trunnion set -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), SS180 (VSC1T), GS160 / GS4 (VSB1T), GL150 (VLA1T), VNA, VBA, VBA, VBB, V50, V90, PV 125

Wire rope cutter -TOPTUL Pro Series-

Toptul
DNCA227E

Wire rope cutter -TOPTUL Pro Series-

PTFE-spray -MOTIP- 400ml

PTFE-spray -MOTIP- 400ml

Matching

Alternative products

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable

BGM ORIGINAL

BGM ORIGINAL
4350002

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - laid cable

Matching

Customers also bought

Nut for petrol tank cap - knurled nut - VESPA - V50, V90, SS50, SS90, PV125, ET3, VNA, Super, GL150 (VLA1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), SS180, PX, PK

Hurricane
0205730

Nut for petrol tank cap - knurled nut - VESPA - V50, V90, SS50, SS90, PV125, ET3, VNA, Super, GL150 (VLA1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), SS180, PX, PK

Seal Ring - PIAGGIO - Ø=48 mm x 1.5 mm - used for the main shaft of the transmission on PK XL/XL2, PX, T5, and Cosa models

Piaggio
1009101

Seal Ring - PIAGGIO - Ø=48 mm x 1.5 mm - used for the main shaft of the transmission on PK XL/XL2, PX, T5, and Cosa models

Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)

Air filter -POLINI- Vespa V50, PV125, PK50, PK80, PK125 (Dellorto PHBL 24-25mm)

Circlip for gudgeon pin -16mm x 1.20mm- double G type

Circlip for gudgeon pin -16mm x 1.20mm- double G type

Grommet rear sidepanel hook -PIAGGIO- Vespa Largeframe (1958-)

Piaggio
1024041

Grommet rear sidepanel hook -PIAGGIO- Vespa Largeframe (1958-)

Horn cover -OEM QUALITY- Vespa P-range (-1984) - chrome

OEM-Qualität
1050002

Horn cover -OEM QUALITY- Vespa P-range (-1984) - chrome

Badge horn cover -VESPA- Piaggio hexagon - Vespa PX EFL (1984-2000), Vespa T5 125cc, Vespa PK

Piaggio
1050007

Badge horn cover -VESPA- Piaggio hexagon - Vespa PX EFL (1984-2000), Vespa T5 125cc, Vespa PK

Cascade lettering -OEM QUALITY- Vespa Piaggio hexagon - Vespa Sprint (from year 1965), Sprint Veloce (from year 1969), Rally180 (VSD1T) (from year 1968), Rally200 (VSE1T) (from year 1972), GT125 (from year 1966), GTR125 (from year 1969), TS

OEM-Qualität
1050013

Cascade lettering -OEM QUALITY- Vespa Piaggio hexagon - Vespa Sprint (from year 1965), Sprint Veloce (from year 1969), Rally180 (VSD1T) (from year 1968), Rally200 (VSE1T) (from year 1972), GT125 (from year 1966), GTR125 (from year 1969), TS

Badge legshield -VESPA- Vespa - Vespa PX EFL (since 1984), Vespa T5 125cc (since 1985)

Piaggio
1050019

Badge legshield -VESPA- Vespa - Vespa PX EFL (since 1984), Vespa T5 125cc (since 1985)

Handlebar top -OEM QUALITY- Vespa PX (-1984) - unpainted

OEM-Qualität
1050022

Handlebar top -OEM QUALITY- Vespa PX (-1984) - unpainted

Flywheel cover -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 - models with electric starter -black

OEM-Qualität
1050027

Flywheel cover -OEM QUALITY- Vespa PX80, PX125, PX150, PX200 - models with electric starter -black

Center stand rubbers -OEM QUALITY Ø=22mm- Vespa PX, Cosa, Cosa, T5 125cc, PK - black

OEM-Qualität
1050041

Center stand rubbers -OEM QUALITY Ø=22mm- Vespa PX, Cosa, Cosa, T5 125cc, PK - black

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable