Front brake drum 10 inch CIF black for Vespa Smallframe
Black painted front brake drum for classic 10-inch smallframe models.
The 10-inch CIF front brake drum is a classic replacement brake drum for Vespa Smallframe models with a 10-inch front wheel. It is ideal if the original drum is worn, run-in, visually unsightly or simply no longer practical to use during a restoration. The silk-matt black paintwork fits in very well with classic smallframe bodies and looks much more harmonious than bare or inappropriately re-treated reproduction parts.
CIF
10 inch
front
Smallframe
black silk matt
What this brake drum is intended for
Replacement for worn drums: if the braking surface is worn or the drum is no longer mechanically clean
Useful for restorations: visually matching 10-inch drum in black finish
Classic design: suitable for smallframe models with 10-inch front axle
clean base: makes sense if the bearings, linings and mountings are being replaced anyway
When a new brake drum makes sense
The front brake drum is often an overlooked wear point, especially on older smallframes. Scoring in the braking surface, uneven running, worn seats or simply decades of use are directly noticeable in braking behavior and concentricity. A new drum is usually the better technical solution at the latest when the drum is no longer working properly or everything is open anyway in the course of a complete front axle overhaul.
Visually harmonious design
The drum is painted in satin black and therefore fits in very well with classic smallframe scooters. This surface looks much more harmonious than uncoated or visually unstable reproduction parts, especially on vehicles that are close to the original or have been neatly restored.
Suitable for 10-inch Smallframe
This version is intended for classic Smallframe models with a 10-inch front wheel. These include late V50 Special models from 1972 onwards as well as V50 N, SS50, SS90, PV125 and ET3.
Fitting instructions
The matching kit consisting of nut, washer and split pin with item number 5035-KTA is recommended as a useful addition. The fastening should always be in a technically clean condition, especially on safety-relevant components such as the front brake.
Suitable vehicle models
| Vespa V50 Special | V5B from model year 1972 |
|---|
| Vespa V50 N | 10-inch version |
|---|
| Vespa SS50 / SS90 | suitable |
|---|
| Vespa PV125 / ET3 | suitable |
|---|
Brief technical overview
| manufacturer | CIF |
|---|
| type | Front brake drum |
|---|
| Wheel size | 10 inch |
|---|
| Wheel position | Front wheel |
|---|
| finish | black, satin finish |
|---|
| OEM comparison | 159374 |
|---|
| Recommended accessories | 5035-KTA Nut-washer-splint-kit |
|---|
Conclusion
The CIF front brake drum in 10-inch is a neatly fitting spare part for classic smallframe models with a 10-inch front axle. It makes technical sense for worn original drums and is a visually harmonious solution for restored or near-original vehicles.
FAQ about the CIF 10-inch front brake drum
Suitable for Vespa V50 Special from 1972 onwards, V50 N, SS50, SS90, PV125 and ET3 in the corresponding 10-inch version.
If the braking surface is badly worn, the drum is running out of true or the entire front axle is being overhauled anyway, a new drum is usually the better solution.
The drum is painted satin black.
Yes, the kit with nut, washer and split pin under item number 5035-KTA is recommended as a supplement.
DE | €
